我的标准
购物车
400-168-0010
- 您的位置：
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- BSI >>
- BS EN 3380:1996 Rings, retaining. Technical specification
【国外标准】 Rings, retaining. Technical specification
本网站 发布时间：
2023-12-22
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
暂无
标准号：
BS EN 3380:1996
标准名称：
Rings, retaining. Technical specification
英文名称：
Rings, retaining. Technical specification标准状态：
现行-
发布日期：
1996-06-15 -
实施日期：
出版语种：
- 其它标准
- 上一篇： BS EN 3379:1996 Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts. Classification: 1210 MPa (at ambient temperature)/730°C
- 下一篇： BS EN 3381:1997 Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) /315°C
- 推荐标准
- ASTM D3380-22 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
- ASTM E3380/E3380M-23 Standard Test Method for Evaluating Ground Response Robot Endurance Using Reproducible Terrains
- AS 1038.16-1996 Coal and coke - Analysis and testing Assessment and reporting of results
- AS 1049-1996/Amdt 1-1997 Telecommunication cables - Insulation, sheath and jacket
- AS 1141.1-1996 Methods for sampling and testing aggregates Definitions
- AS 1141.11-1996 Methods for sampling and testing aggregates Particle size distribution by sieving
- AS 1141.12-1996 Methods for sampling and testing of aggregates Materials finer than 75 micrometre in aggregates (by washing)
- AS 1141.3.1-1996 Methods for sampling and testing aggregates Sampling - Aggregates
- AS 1141.4-1996 Methods for sampling and testing of aggregates Bulk density of aggregate
- AS 1141.5-1996 Methods for sampling and testing of aggregates Particle density and water absorption of fine aggregate
- AS 1141.51-1996 Methods for sampling and testing aggregates Unconfined compressive strength of compacted materials
- AS 1141.72-1996 Methods for sampling and testing of aggregates Cement content of cement stabilized materials
- AS 1357.1-1992/Amdt 1-1996 Water supply - Valves for use with unvented water heaters - Protection valves
- AS 1432-1996/Amdt 1-1998 Copper tubes for plumbing, gasfitting and drainage applications
- AS 1444-1996 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
