
【国外标准】 IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications
本网站 发布时间:
2025-04-28
- IEEE 515.1-2022
- 定价: 101元 / 折扣价: 86 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard provides test criteria to determine the suitability of heating devices and fittings that are used for commercial applications. The standard also includes detailed recommendations for the design, installation, and maintenance of electrical resistance trace heating in these applications. Commercial applications include installations both inside and outside commercial business buildings, such as office buildings, hospitals, and airports. Typical applications include freeze protection… read more of water pipes; temperature maintenance of hot water piping and other lines and tubing; protection of sprinkler systems; roof, gutter, and pavement deicing; and other applications as shown in Table 1. For commercial applications involving hazardous (classified) locations, refer to IEC/IEEE Std 60079-30-1 and IEC/IEEE Std 60079-30-2 as well as any other applicable codes and standards. read less
标准号:
IEEE 515.1-2022
标准名称:
IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2205.4.1-1997 Methods for destructive testing of welds in metal - Nick-break test
- AS 2205.5.1-1997 Methods for destructive testing of welds in metal - Macro metallographic test for cross-section examination
- AS 2205.6.1-1997 Methods for destructive testing of welds in metal - Weld joint hardness test
- AS 2205.7.1-1997 Methods for destructive testing of welds in metal - Charpy V-notch impact fracture toughness test
- AS 2205.9.1-1997 Methods for destructive testing of welds in metal - Hot cracking test
- AS 2213.1-2001/Amdt 1-2002 Commercial road vehicles - Mechanical connections between towing vehicles Selection and marking of pin-type couplings and drawbar eyes
- AS 2219.1.1-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to hot sodium hydroxide
- AS 2219.1.3-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to boiling hydrochloric acid
- AS 2219.1.5-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to citric acid at room temperature
- AS 2219.2.1-1978 Methods of test for vitreous enamel coatings Physical tests - Determination of resistance of vitreous enamel coatings on steel to thermal shock
- AS 2224.1-1986 Medicine measures (including paediatric droppers) Glass - For general use
- AS 2225-1994/Amdt 1-1996 Insulating gloves for electrical purposes
- AS 2229.1-1982 Electrical equipment for explosive atmospheres - Electrical systems of dispensing equipment Flammable liquid dispensing equipment
- AS 2275.1-1979 Combustible gas detection instruments for use in explosive atmospheres General requirements for explosion protection of electrical apparatus and systems
- AS 2276.1-1992 Cables for traffic signal installations Multicore power cables