- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- BSI >>
- BS EN ISO 20505:2025 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of the interlaminar shear strength and shear modulus of continuous-fibre-reinforced composites by the compression of double-notched test pieces and by the Iosipescu test

【国外标准】 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of the interlaminar shear strength and shear modulus of continuous-fibre-reinforced composites by the compression of double-notched test pieces and by the Iosipescu test
本网站 发布时间:
2025-03-03
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
BS EN ISO 20505:2025
标准名称:
Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of the interlaminar shear strength and shear modulus of continuous-fibre-reinforced composites by the compression of double-notched test pieces and by the Iosipescu test
英文名称:
Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of the interlaminar shear strength and shear modulus of continuous-fibre-reinforced composites by the compression of double-notched test pieces and by the Iosipescu test标准状态:
现行-
发布日期:
2025-02-28 -
实施日期:
出版语种:
- 其它标准
- 上一篇: BS EN ISO 19901-4:2025 Oil and gas industries including lower carbon energy. Specific requirements for offshore structures
- 下一篇: BS EN ISO 21952:2025 - TC Tracked Changes. Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels. Classification
- 推荐标准
- ASTM D6364-06(2025) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
- ASTM D3933-98(2025) Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
- ASTM D3964-10(2025) Standard Practice for Selection of Coating Specimens for Appearance Measurements
- ASTM D4891-13(2025) Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
- ASTM D5160-95(2025) Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
- ASTM D5521/D5521M-18(2025) Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
- ASTM D5781/D5781M-18(2025) Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
- ASTM D5931-20(2025) Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
- ASTM D5959-12(2025) Standard Test Method for Bulk Density of Level Paintbrush Filaments
- ASTM D6364-06(2025) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
- ASTM D6507-19(2025) Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
- ASTM D6905-20(2025)e1 Standard Practice for Impact Flexibility of Organic Coatings
- ASTM D6922-13(2025) Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
- ASTM D6957-12(2025) Standard Practice for Measuring Curl in Paint Brush Filling Material
- ASTM D7179-18(2025) Standard Test Method for Determining Geonet Breaking Force