
【国外标准】 Standard Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both (Withdrawn 2015)
本网站 发布时间:
2024-02-28
- ASTM F1629-95(2007)
- Withdrawn, No replacement
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 The Emergency Medical Services Management Information System (EMS-MIS) serves as a framework for the management and linkage of data documenting the complete emergency episode from onset through the pre-hospital, emergency department, and hospital phases to final discharge. This document establishes a standard guideline for the planning, development, and maintenance of an EMS-MIS framework, including linkage among pre-hospital, hospital, and other public safety or government agencies. The resultant EMS-MIS should be capable of monitoring the compliance of an EMS system with its established system standards, and provide an objective basis upon which different EMS systems can be comparatively evaluated.1.2 EMS-MIS Goals1.2.1 To manage data regarding response to a medical emergency.1.2.2 To provide a process for obtaining and documenting objective, reliable data.1.2.3 To provide information that can be used to affect operational changes in an EMS system leading to the delivery of better quality emergency medical care.1.2.4 To provide information to guide the rational investment of local, state, and national resources to improve and maintain EMS.1.3 This guide will standardize data needed for decision making at various levels of the EMS system, and offer suggestions as to the appropriate use of this information.1.4 This guide comments on several possible configurations for information flow and data processing, recognizing that no one configuration is best suited to all circumstances.1.5 This guide focuses on pre-hospital medical activities, including emergency responses, scheduled transports, and all interinstitutional transfers.1.6 This guide addresses EMS-MIS techniques applicable to the internal operations of outpatient and inpatient facilities as well as pre-hospital care providers.1.7 This guide will not address specialized data systems and applications such as trauma registries, but will allow for interfacing with such applications.1.8 This guide will not address computer-aided dispatch (CAD) systems, nor system status management (SSM) applications, but will allow for interfacing with such applications.
标准号:
ASTM F1629-95(2007)
标准名称:
Standard Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both (Withdrawn 2015)
英文名称:
Standard Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both (Withdrawn 2015)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM C1472-16(2022) Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
- ASTM C1473-19 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
- ASTM C1477-19 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
- ASTM C1479/C1479M-22 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
- ASTM C1483/C1483M-17(2022) Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
- ASTM C1485-19 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
- ASTM C1486-18(2023) Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
- ASTM C1487-19 Standard Guide for Remedying Structural Silicone Glazing
- ASTM C1489-15(2022) Standard Specification for Lime Putty for Structural Purposes
- ASTM C1498-04a(2023) Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
- ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C150/C150M-22 Standard Specification for Portland Cement
- ASTM C1504-20 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
- ASTM C1507-20 Standard Test Method for Radiochemical Determination of Strontium-90 in Soil
- ASTM C1508-18 Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy