【国外标准】 IEEE Draft Standard for Test Procedures for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
本网站 发布时间:
2025-10-27
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This standard applies to alternating current (ac) high-voltage circuit breakers with rated maximum voltage above 1000 V. It defines various tests that are made on ac high-voltage circuit breakers, except for generator circuit breakers, which are covered in IEC/IEEE 62271-37-013:2015. It specifies the tests and describes the accepted methods used to verify assigned ratings defined in IEEE Std C37.04. It also describes the test procedures associated with production and field installation. The… read more test procedures are divided into the following classifications: a) Design tests; b) Production tests; c) Conformance tests; d) Field tests. NOTE--Design tests are referred to as "Type" tests, and Production tests are referred to as "Routine" tests in IEC standards. read less
标准号:
IEEE PC37.09
标准名称:
IEEE Draft Standard for Test Procedures for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: IEEE P3115 IEEE Draft Guide for the Technical Specification of 5G (5th Generation Mobile Network) Power Communication Terminal
- 下一篇: IEEE PC37.06.1 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 V) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
- 推荐标准
- ASTM C898/C898M-09(2024) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
- ASTM E1318-09(2024) Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods
- ASTM F624-09(2024) Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
- ASTM A543/A543M-09(2021) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
- ASTM A724/A724M-09(2023) Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
- ASTM A896/A896M-09(2025)e1 Standard Practice for Conducting Case Studies on Galvanized Structures
- ASTM A930-09(2020) Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
- ASTM B428-09(2018) Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
- ASTM B490-09(2021) Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
- ASTM B499-09(2021)e1 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM B530-09(2021) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
- ASTM B788/B788M-09(2025) Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
- ASTM B826-09(2020) Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- ASTM B926-09(2025) Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
- ASTM C1069-09(2022) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

我的标准
购物车
400-168-0010








