【国外标准】 IEEE Trial-Use Standard for Testing and Evaluating the Dielectric Performance of Celebratory Balloons in Contact with Overhead Power Distribution Lines Rated up to 38 kV System Voltage
本网站 发布时间:
2025-10-27
- IEEE 2845-2023
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This standard is applicable to celebratory balloons that are comparable in size and shape to what are commonly referred to as foil balloons and are available in retail stores and filled with helium or a lighter-than-air gas. This test procedure evaluates the dielectric performance of celebratory balloons in contact with simulated energized overhead distribution power lines with the intent of minimizing balloon-caused power system outages (or electrical faults). The scope is limited to… read more distribution system voltages of 38 kV or less and only single balloons. The effects of having any moisture, contaminants, or string or ribbon attachments to the balloon(s) are not investigated under this procedure. read less
标准号:
IEEE 2845-2023
标准名称:
IEEE Trial-Use Standard for Testing and Evaluating the Dielectric Performance of Celebratory Balloons in Contact with Overhead Power Distribution Lines Rated up to 38 kV System Voltage
英文名称:
IEEE Trial-Use Standard for Testing and Evaluating the Dielectric Performance of Celebratory Balloons in Contact with Overhead Power Distribution Lines Rated up to 38 kV System Voltage标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2845.3-2010/Amdt 1-2010 Water supply - Backflow prevention devices Field testing and maintenance of testable devices
- AS/NZS 2023:1995 Baths for ablutionary purposes
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1033-18(2023) Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
- ASTM A1071/A1071M-11(2023) Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
- ASTM A1079-17(2023) Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM A1095-15(2023) Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
- ASTM A126-04(2023) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
- ASTM A387/A387M-17a(2023) Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
- ASTM A435/A435M-17(2023) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
- ASTM A474-03(2023) Standard Specification for Aluminum-Coated Steel Wire Strand
- ASTM A517/A517M-17(2023) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
- ASTM A532/A532M-10(2023) Standard Specification for Abrasion-Resistant Cast Irons
- ASTM A571/A571M-01(2023)e1 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
- ASTM A577/A577M-17(2023) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

我的标准
购物车
400-168-0010








