
【国外标准】 Zins coatings on steel tubes; quality standard for hot dip galvanizing of steel tubes for installation purposes
本网站 发布时间:
2025-06-05
- DIN 2444
- 废止
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
DIN 2444
标准名称:
Zins coatings on steel tubes; quality standard for hot dip galvanizing of steel tubes for installation purposes
英文名称:
标准状态:
废止-
发布日期:
2001-01-01 -
实施日期:
出版语种:
- 其它标准
- 推荐标准
- ASTM E2444-11(2018) Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films
- ASTM F2444-04(2018) Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
- ASTM D2444-21 Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
- KS F 2444 얕은 기초의 평판 재하시험 방법
- AS 2444-1995/Amdt 1-1996 Portable fire extinguishers and fire blankets - Selection and location
- AS 2444-1995 Portable fire extinguishers and fire blankets - Selection and location
- AS 2444-1995/Amdt 2-1997 Portable fire extinguishers and fire blankets - Selection and location
- DIN EN 10222-4/A1 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength; German and English version EN 10222-4:2017/prA1:2019
- DIN EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
- DIN EN 10226-2 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
- DIN EN 10226-3 Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges
- DIN EN 10229 Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
- DIN EN 1023-3 Office furniture - Screens - Part 3: Test methods; English version of DIN EN 1023-3
- DIN EN 10230-1 Steel wire nails - Part 1: Loose nails for general applications
- DIN EN 10243-1 Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; English version of DIN EN 10243-1