我的标准
购物车
400-168-0010
【国际标准】 Polygonal turret interface with flat contact surface — Part 1: Shanks of type F, H and A
本网站 发布时间：
2025-08-20
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
暂无
标准号：
ISO 5686-1:2024 EN
标准名称：
Polygonal turret interface with flat contact surface — Part 1: Shanks of type F, H and A
英文名称：
Polygonal turret interface with flat contact surface — Part 1: Shanks of type F, H and A标准状态：
现行-
发布日期：
2024-10-03 -
实施日期：
出版语种：
EN
- 其它标准
- 上一篇： ISO 5686-2:2024 EN 22b97a27 Polygonal turret interface with flat contact surface — Part 2: Receivers of type F, H, A and X for shanks of type F, H and A
- 下一篇： ISO 10896-8:2024 EN 7636290c Rough-terrain trucks — Safety requirements and verification — Part 8: Requirements for trucks designed for towing
- 推荐标准
- ISO 26622-2:2008 EN 2bc24840 Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers
- ISO 26623-1:2020 EN 4ad026f9 Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
- ISO 26623-2:2014 EN 1d93cc64 Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
- ISO 296:1991 EN 76655a81 Machine tools — Self-holding tapers for tool shanks
- ISO 3089:2005 EN d31cb29d Machine tools — Test conditions for self-centring, manually operated chucks with one-piece jaws
- ISO 3442-1:2005 EN f01cce79 Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 1: Manually operated chucks with tongue and groove type jaws
- ISO 3442-3:2007 EN 16758154 Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 3: Power-operated chucks with serrated jaws
- ISO 3937-1:2008 EN fab3b68b Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper
- ISO 3937-2:2008 EN 53e45aad Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper
- ISO 4207:2016 EN a5e88e8b Counterbores with Morse taper shanks and detachable pilots
- ISO 5413:1993 EN fa651dd9 Machine tools — Positive drive of Morse tapers
- ISO 5414-2:2002 EN 260edd87 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation
- ISO 5686-1:2024 EN 084fe919 Polygonal turret interface with flat contact surface — Part 1: Shanks of type F, H and A
- ISO 5686-2:2024 EN 22b97a27 Polygonal turret interface with flat contact surface — Part 2: Receivers of type F, H, A and X for shanks of type F, H and A
- ISO 5734:1986 EN c5587918 Acceptance conditions of mechanical dividing heads for machine tools — Testing of accuracy
