
【国外标准】 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification covers the requirements for standard-type needle roller bearings with drawn outer rings, full complement, without inner rings, and with either open (Type B) or closed ends (Type M). Materials covered by this specification are needle rollers which shall be manufactured from steel, alloy, or carbon, and shall be of Grade E50100 or E52100. Rings, on the other hand, shall be manufactured from steel, alloy, or carbon, with carburizing grade 4620, 4720, 8620, 8720, or 1010-1020. Needle rollers and rings shall be hardened by heat treatment, and bearings shall be coated with rust preventive film.1.1 This specification covers standard-type needle roller bearings having drawn outer rings, full complement, without inner rings, with either open or closed ends.1.2 The use of recycled materials that meet the requirements of the applicable material specification without jeopardizing the intended use of the item is encouraged.1.3 The inner rings specified in this specification are not intended for use in flight critical systems of aircraft.1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.NOTE 1: This specification contains many of the requirements of MS17131, which was originally developed by the Department of Defense and is currently maintained by the Defense Supply Center Richmond.
标准号:
ASTM F2162-01(2016)
标准名称:
Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
英文名称:
Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2593-2004 (R2016)/Amdt 1-2007 Boilers - Safety management and supervision systems
- AS 2613-2005 (R2016)/Amdt 1-2007 Safety devices for gas cylinders
- AS 2805.4.1-2001 (R2016)/Amdt 1-2006 Electronic funds transfer - Requirements for interfaces Message authentication - Mechanism using a block cipher
- AS 4267-1995 (R2016)/Amdt 1-1995 Pressure regulators for use with industrial compressed gas cylinders
- AS 4428.5-1998 (R2016)/Amdt 1-2002 Fire detection, warning, control and intercom systems - Control and indicating equipment Power supply units
- AS 4429-1999 (R2016)/Amdt 1-2002 Methods of test and rating requirements for smoke-spill fans
- AS 4458-1997 (R2016)/Amdt No. 1-1999 Pressure equipment - Manufacture
- AS 5040-2003 (R2016)/Amdt 1-2007 Installation of security screen doors and window grilles
- AS 5041-2003 (R2016)/Amdt 1-2007 Methods of test - Security screen doors and window grilles
- AS 5068-2006 (R2016)/Amdt 1-2010 Timber - Finger joints in structural products - Production requirements
- AS 60044.1-2007 (R2016)/Amdt 1-2012 Instrument transformers Current transformers
- AS ISO/IEC 17025-2005 (R2016)/Amdt 1-2006 General requirements for the competence of testing and calibration laboratories
- AS/NZS 1170.1:2002 (R2016)/Amdt 1:2005 Structural design actions Permanent, imposed and other actions
- AS/NZS 1170.1:2002 (R2016)/Amdt 2:2009 Structural design actions Permanent, imposed and other actions
- AS/NZS 1595:1998 (R2016)/Amdt 1:2014 Cold-rolled, unalloyed, steel sheet and strip