我的标准
购物车
400-168-0010
【国外标准】 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Pole Mounted Pruners - Safety and Environmental Requirements
本网站 发布时间：
2024-04-10
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
This standard gives safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted pruners, including extendable and telescopic units, having an integral combustion engine as their power head and using a drive shaft to transmit power to a cutting attachment consisting of a saw chain, a reciprocating blade, or single-piece circular saw blade with a 205 mm (8.1 in) maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these units and the type of information on safe working practices to be provided by the manufacturer are specified.
标准号：
ANSI/OPEI B175.7-2019
标准名称：
Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Pole Mounted Pruners - Safety and Environmental Requirements
英文名称：
Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Pole Mounted Pruners - Safety and Environmental Requirements标准状态：
现行-
发布日期：
-
实施日期：
出版语种：
- 推荐标准
- ASTM B887-24 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
- AS 2805.6.1.1-2009 (R2019)/Amdt 1-2011 Electronic funds transfer - Requirements for interfaces Key management - Principles
- AS 2805.7-1986 Electronic funds transfer - Requirements for interfaces POS message content
- AS 2879.7-1997 (R2013) Alumina Determination of trace elements - Wavelength dispersive X-ray fluorescence spectrometric method
- AS 2891.7.1-1993 Methods of sampling and testing asphalt Determination of maximum density of asphalt - Water displacement method
- AS 3565.4-2007 (R2019)/Amdt 1-2010 Meters for water supply In-service compliance testing
- AS 3572.7-1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test Determination of extension to failure of unreinforced resins
- AS 3580.7.1-2011/Amdt 1-2012 Methods for sampling and analysis of ambient air Determination of carbon monoxide - Direct-reading instrumental method
- AS 3706.7-2014 Geotextiles - Methods of test Determination of pore-size distribution - Dry-sieving method
- AS 3778.3.7-2001 Measurement of water flow in open channels Velocity-area methods - Measurement by ultrasonic (acoustic) method
- AS 3778.7-2008 Measurement of water flow in open channels Determination of volume of water and water level in lakes and reservoirs
- AS 3785.7-1993/Amdt 1-1993 Underground mining - Shaft equipment - Sheaves
- AS 3785.7-2006/Amdt 1-2011 Underground mining - Shaft equipment Sheaves
- AS 3789.7-1996 Textiles for health care facilities and institutions General apparel
- AS 3818.7-2006 Timber - Heavy structural products - Visually graded Large cross-section sawn hardwood engineering timbers
