- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国际标准 >>
- 81.080 >>
- ISO 20565-3:2008 EN dc127ad9 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)

【国际标准】 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
本网站 发布时间:
2025-02-18
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
ISO 20565-3:2008 EN
标准名称:
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
英文名称:
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)标准状态:
现行-
发布日期:
2008-11-25 -
实施日期:
出版语种:
EN
- 其它标准
- 上一篇: ISO 20565-2:2008 EN a20c051a Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
- 下一篇: ISO 20566:2005 EN 637d66d8 Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory car-wash
- 推荐标准
- ISO 10059-1:2025 EN eb92c9ed Dense shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
- ISO 10059-2:2003 EN 654aa7b2 Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
- ISO 10060:1993 EN add712ba Dense, shaped refractory products — Test methods for products containing carbon
- ISO 10080:1990 EN 5421c846 Refractory products — Classification of dense, shaped acid-resisting products
- ISO 10081-1:2003 EN ce71d861 Classification of dense shaped refractory products — Part 1: Alumina-silica
- ISO 10081-2:2003 EN c8d16865 Classification of dense shaped refractory products — Part 2: Basic products containing less than 7 % residual carbon
- ISO 13765-1:2004 EN b90eab6e Refractory mortars — Part 1: Determination of consistency using the penetrating cone method
- ISO 13765-2:2004 EN 2d7dcea1 Refractory mortars — Part 2: Determination of consistency using the reciprocating flow table method
- ISO 13765-3:2004 EN ff26de32 Refractory mortars — Part 3: Determination of joint stability
- ISO 13765-4:2004 EN f33777b7 Refractory mortars — Part 4: Determination of flexural bonding strength
- ISO 13765-6:2004 EN 39b25263 Refractory mortars — Part 6: Determination of moisture content of ready-mixed mortars
- ISO 13765-7:2021 EN 1af4b314 Refractory mortars — Part 7: Determination of permanent change in dimensions on heating
- ISO 16334:2013 EN f67a4f4e Monolithic refractory products — Determination of resistance to explosive spalling
- ISO 16349:2015 EN 7055f58e Refractory materials — Determination of abrasion resistance at elevated temperature
- ISO 1893:2007 EN 900c3142 Refractory products — Determination of refractoriness under load — Differential method with rising temperature