
【国外标准】 Medical Electrical Equipment - Part 1: General Requirements for Safety
本网站 发布时间:
- CAN/CSA-C22.2 NO. 601.1-M90 (R2005)
- 现行
- 定价: 1229元 / 折扣价: 1045 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This PDF includes Update No. 2
1.1 Scope
This Standard applies to the safety of MEDICAL ELECTRICAL EQUIPMENT (as
defined in Sub-Clause 2.2.15) designed to be installed and used in accordance with the rules of the Canadian Electrical Code, Part I.
标准号:
CAN/CSA-C22.2 NO. 601.1-M90 (R2005)
标准名称:
Medical Electrical Equipment - Part 1: General Requirements for Safety
英文名称:
Medical Electrical Equipment - Part 1: General Requirements for Safety标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-C22.2 No. 60079-1-07 Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures "d" (Adopted CEI/IEC 60079-1:2003, fifth edition, 2003-11) | Matériel électrique pour atmosphères explosives gazeuses - Partie 1: Enveloppes antidéflagrantes ?d? (norme CEI
- 下一篇: CAN/CSA-C22.2 NO. 601.1.3-98 (R02) Medical Electrical Equipment - Part 1: General Requirements for Safety - 3. Collateral Standard: General Requirements for Radiation Protection in Diagnostic X-Ray Equipment (Adopted CEI/IEC 601-1-3:1994, first edition) / Appareils électromédicaux - Premiè
- 推荐标准
- ASTM D6525/D6525M-18(2023) Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
- ASTM D6535/D6535M-18 Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM D6536/D6536M-18 Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM D6573/D6573M-13(2020) Standard Specification for General Purpose Wirebound Shipping Boxes
- ASTM D6574/D6574M-13(2021) Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
- ASTM D6575/D6575M-22 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
- ASTM D6578/D6578M-13(2018) Standard Practice for Determination of Graffiti Resistance
- ASTM D6578/D6578M-13(2024) Standard Practice for Determination of Graffiti Resistance
- ASTM D6627/D6627M-22 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
- ASTM D6630/D6630M-16(2022) Standard Guide for Low-Slope Insulated Roof Membrane Assembly Performance
- ASTM D6637/D6637M-15(2023) Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
- ASTM D6641/D6641M-23 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
- ASTM D6671/D6671M-22 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
- ASTM D6693/D6693M-20(2024) Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
- ASTM D6694/D6694M-15(2023) Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems