【国外标准】 Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences (Withdrawn 2020)
本网站 发布时间:
2024-02-28
- ASTM E2743-11
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
1.1 This specification delineates procedural requirements for evaluating and selecting transportation for use in meetings, events, trade shows, and conferences (hereafter referred to as events). 1.2 Transportation for events includes, but is not limited to, the following activities: transporting participants to/from conference related events, transporting participants between conference facilities and hotels, and transportation of materials. This specification focuses primarily on the reduction of carbon emissions from transport-related activity arising from events. 1.3 This specification identifies environmental sustainability criteria to be included in the selection of transportation by planners or destination management companies. This specification also identifies criteria for transportation companies. 1.4 Transportation companies include bus, charter, limousine, airlines, freight forwarders, taxi, ferry boat, van pool, rail and ground operators, and rental car agencies. 1.5 There are nine specifications covering the following areas of event planning: destination selection, accommodations, food and beverage, audio visual, onsite offices, communication and marketing materials, transportation, exhibits, and venues. Within each specification are eight categories criteria: staff management policy, communications, waste management, energy, air quality, water, procurement, and community partners. Each category is further split into four progressive levels of achievement. Information is presented as follows: Information within each specification is divided as follows: Main Body, Referenced Documents, Terminology, Planner Requirements for Level 1, Supplier Requirements for Level 1, and Keywords; AnnexesPlanner Requirements for Levels 2 – 4 and Supplier Requirements for Levels 2 – 4. 1.6 All areas of performance under this specification may not be relevant for each event, or for each facility or provider of event services. In some cases, an event planner would use this specification in conjunction with other specification (for example, Specifications , ) or this specification may be used individually. In other words, elements of an event may be separated out and considered solely, or added together and considered as a unit (for example, venues used individually versus transportation, accommodations, and destination selection used in conjunction). Furthermore, this specification applies separately to each supplier for an event. This means if multiple suppliers are used within the context of a single specification, each supplier must individually meet the supplier requirements. To be considered an environmentally sustainable event at Level 1, all areas applicable to that event shall be achieved. 1.7 If higher levels are achieved in some sections, the event can only be considered environmentally sustainable at the lowest level achieved. 1.8 The use of levels within this specification recognizes the path to environmentally sustainable events is a multi-stage effort. The idea behind the levels is to provide a coherent baseline for measuring environmental performance, to be flexible enough to adapt to the needs of more advanced planners and to establish a performance path that encourages further environmental performance improvement. In addition, the evolution of products and services to support events is expected, allowing additional advancements and underscoring the dynamic nature of environmental sustainability. This specification primarily focuses on environmental sustainability, while some aspects of economic and social sustainability are included recognizing the complete path toward overall sustainability. 1.9 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM E2743-11
标准名称:
Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences (Withdrawn 2020)
英文名称:
Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences (Withdrawn 2020)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- 24/30485462 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard