- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- IEEE >>
- IEEE 802.22.1-2010 IEEE Standard for Information Technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 22.1: Standard to Enhance Harmful Interference Protection for Low-Power Licensed Devices Operating in TV Broadcast Bands

【国外标准】 IEEE Standard for Information Technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 22.1: Standard to Enhance Harmful Interference Protection for Low-Power Licensed Devices Operating in TV Broadcast Bands
本网站 发布时间:
2025-04-28
- IEEE 802.22.1-2010
- 定价: 150元 / 折扣价: 128 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard specifies methods to provide enhanced protection to protected devices such as those used in the production and transmission of broadcast programs [e.g., devices licensed as secondary under Title 47 of the Code of Federal Regulations (CFR) in the USA and equivalent devices in other regulatory domains] from harmful interference caused by license-exempt devices (e.g., IEEE P802.22) that also are intended to operate in the TV Broadcast Bands.
标准号:
IEEE 802.22.1-2010
标准名称:
IEEE Standard for Information Technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 22.1: Standard to Enhance Harmful Interference Protection for Low-Power Licensed Devices Operating in TV Broadcast Bands
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6529-22 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50 μS/cm to 1000 μS/cm
- ASTM D653-22 Standard Terminology Relating to Soil, Rock, and Contained Fluids
- ASTM D6559-22 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
- ASTM D6560-22 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
- ASTM D6575/D6575M-22 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
- ASTM D6595-22 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
- ASTM D6615-22 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
- ASTM D6627/D6627M-22 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
- ASTM D6671/D6671M-22 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
- ASTM D6730-22 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
- ASTM D6772/D6772M-22 Standard Test Method for Dimensional Stability of Sandwich Core Materials
- ASTM D6773-22 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
- ASTM D6890-22 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D6927-22 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
- ASTM D6933-22 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)