
【国外标准】 Information Technolgy v Fibre Distributed Data Interface (FDDI) v Abstract Test Suite for FDDI Physical Layer Protocol Conformance Testing (PHY ATS) (formerly ANSI X3.248-1996 (R2001))
本网站 发布时间:
2023-07-12
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Defines a conformance test of the PHY functions in a path through an FDDI node. Figure 1 is a functional block diagram of an FDDI path. The path contains the necessary functions to repeat (that is decode and retransmit) frames through an FDDI mode. The PHY Repeat Filter is optional when there is a MAC in the repeat path, then the function is implemented in PHY. This test standard makes no assumption about the presence or absence of MAC on the path and is intended to operate with or without a MAC. It tests the repeat filter function wherever it is located. However, the results of some tests may be slightly differenct if a MAC is present.
标准号:
INCITS 248-1996[S2011]
标准名称:
Information Technolgy v Fibre Distributed Data Interface (FDDI) v Abstract Test Suite for FDDI Physical Layer Protocol Conformance Testing (PHY ATS) (formerly ANSI X3.248-1996 (R2001))
英文名称:
Information Technolgy v Fibre Distributed Data Interface (FDDI) v Abstract Test Suite for FDDI Physical Layer Protocol Conformance Testing (PHY ATS) (formerly ANSI X3.248-1996 (R2001))标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS 248-1996 (S2021) Abstract Test Suite for FDDI Physical Layer Protocol Conformance Testing (FDDI PHY ATS)
- 下一篇: INCITS 249-1995[S2010] Information Technology v Unrecorded Magnetic Tape Mini-Cartridge for Information Interchange v 0.25 in (6.35 mm), 10 000 v 14 700 ftpi (394v579 ftpmm) Coercivity 550 oersteds (44 000 amperes/meter (Types 2000, 2060, 2080, 2120) (formerly ANSI X3.249-1995 (R2000))
- 推荐标准
- ASTM F2011-02(2018) Standard Specification for Safety and Performance of Fun-Karts
- ASTM B248-22 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
- ASTM B248M-22 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
- ASTM E2011-21 Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand
- ASTM B248-22 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
- HB 141:2011 Risk financing guidelines
- HB 18.62:1996 Guidelines for third-party certification and accreditation Guide 62 - General requirements for bodies operating assessment and certification/registration of quality systems
- HB 239:2011 Guidance on the repair and overhaul of electrical equipment for explosive atmospheres
- HB 393-2011 Bunk beds for the short-term rental accommodation industry
- HB 5031-2011 Records classification
- HB 81.1-1996/Amdt 1-2001 Field guide for traffic control at works on roads Short-term urban works, daytime only
- INCITS 100A-1991[S2010] Information Systems v Interface between Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE) for Operation with Packet-Switched Data Communications Networks (PSDN), or between Two DTEs, by Dedicated Circuit (NUI and NUI-Derived Facility Extentions (formerly ANSI X3.100a-1991 (R2000))
- INCITS 103-1983 (S2021) Unrecorded Magnetic Tape Minicassette For Information Interchange, Coplanar 3.81 mm (0.150 Inch)
- INCITS 11-1990 (S2017) General Purpose Paper Cards for Information Processing
- INCITS 111-1986 (S2017) Information Systems - Optical Character Recognition (OCR) - Matrix Character Sets for OCR-M