【国外标准】 Information Technology v 90-mm (3.54-in) Optical Disk Cartridge Rewritable and Read Only Using Discrete Block Format (DBF) Method for Digital Information Interchange (formerly ANSI X3.213-1994 (R1999))
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
Specifies the characteristics of a 90-mm (3.54-in) optical disk cartridge (ODC) of the type providing for information to be written, read, and erased many times, using thermomagnetic and magneto-optical effect. A part or all of the optical disk may be prerecorded (read only) and be reproduced by embossing information in the recording layer. This information is read without recourse to the magneto-optical effect. The optical disk cartridge consists of two parts, a protective case and an optical disk held inside the case. The optical disk shall be single-sided with one substrate and one recording layer. To order an electronic draft: NCITS Storefront at: http://www.cssinfo.com/cgi-bin/detail?product_id=56203
标准号:
INCITS 213-1994[S2009]
标准名称:
Information Technology v 90-mm (3.54-in) Optical Disk Cartridge Rewritable and Read Only Using Discrete Block Format (DBF) Method for Digital Information Interchange (formerly ANSI X3.213-1994 (R1999))
英文名称:
Information Technology v 90-mm (3.54-in) Optical Disk Cartridge Rewritable and Read Only Using Discrete Block Format (DBF) Method for Digital Information Interchange (formerly ANSI X3.213-1994 (R1999))标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM G213-17(2023) Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
- ATS 5200.489-2009 Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications
- ATS 5200.501-2009 Technical Specification for plumbing and drainage products Anti-infiltration overflow relief point
- AS 2021-1994 Acoustics - Aircraft noise intrusion - Building siting and construction
- AS 2021-1994/Amdt 1-1995 Acoustics - Aircraft noise intrusion - Building siting and construction
- AS 2026-1994 Density hydrometers
- AS 2030.1-2009 Gas cylinders General requirements
- AS 2129-1994 Flanges for pipes, valves and fittings
- AS 2129-1994/Amdt 1-1995 Flanges for pipes, valves and fittings
- AS 2159-2009/Amdt 1-2010 Piling - Design and installation
- AS 2207-1994 Non-destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel
- AS 2214-1994 Certification of welding supervisors - Structural steel welding
- AS 2225-1994/Amdt 1-1996 Insulating gloves for electrical purposes
- AS 2311-1992/Amdt 1-1994 The painting of buildings
- AS 2341.15-1994 Methods of testing bitumen and roadmaking products Distillation of cutback bitumen
我的标准
购物车
400-168-0010










