【国外标准】 Specification for Minimum Performance Requirements for Emergency Medical Service (EMS) Ground Vehicles (Withdrawn 1997)
本网站 发布时间:
2024-02-28
- ASTM F1230-89
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
1.1 This specification covers minimum performance and safety requirements for EMS ground vehicles used: 1.1.1 In the transportation of the sick and injured to or from an appropriate medical facility while basic or advanced, or both, life support services are being provided, 1.1.2 In the delivery of interhospital critical transport care, 1.1.3 In the delivery of nonemergency, medically required, transport services, and 1.1.4 In the transportation and delivery of personnel and supplies essential for proper care of an emergent patient. 1.2 It includes the performance standards for necessary materials, equipment, and systems to the levels outlined in recognized standards, whether clinical or vehicular. 1.3 The document is divided into two sections. Section A describes those vehicles used primarily for responding to and for transporting and treating the patient while en route to an appropriate medical facility. Section B will be developed at a later date and will describe those vehicles primarily used for transporting the nonemergency patient, for transporting essential personnel or equipment, or both, to and from a location where emergency medical care is required, or for transporting patients in areas not accessible by ambulances described in Section A. 1.4 This document establishes criteria that shall be considered in the performance, specification, purchase and acceptance testing of ground vehicles for EMS use. 1.5 This document does not define the staffing of ground vehicles or the clinical practice of emergency medicine. 1.6 The entire document should be read before ordering an ambulance, in order to be knowledgeable of which equipment is standard, and which options are desired. Due to the variety of ambulance equipment or features, some options may be incompatible with all chassis manufacturers' models. Detailed technical information is available from the chassis manufacturers. 1.7 The sections in this specification appear in the following sequence: Section 1 Referenced Documents 2 Terminology 3 Materials 4 Requirements 5 General Vehicle Types and Floor Plan 5.1 Vehicle, Components, Equipment, and Accessories 5.2 Vehicle Operation, Performance, and Physical Charac- teristics 5.3 Vehicle Weight Ratings and Payload 5.4 Chassis, Engine, and Components 5.5 Electrical System and Components 5.6 Lighting, Ambulance Exterior and Interior 5.7 Cab-body Driver Compartment and Equipment 5.8 Vehicle Body and Patient Area 5.9 Storage 5.10 Oxygen and Suction Systems and Equipment 5.11 Environmental: Climatic and Noise Parameters 5.12 Communications 5.13 Preparation for Painting, Color, and Markings 5.14 Undercoating 5.15 Corrosionproofing 5.16 Markings, Data Plates, Warranty Notice, etc. 5.17 Documentation 5.18 Predelivery Inspection and Servicing 5.19 Additional Systems, Medical Equipment, Accessories, and Supplies 5.20 Quality Assurance Provisions, Inspection, and Testing 6 Responsibility for Inspection and Tests 6.1 Inspection and Testing 6.2 Certifications 6.3 "Star of Life" Certification Requirements 6.4 Tests 6.5 Appendixes Partial Listing Specialty-Type Ground Vehicles X1 Typical Storage Volumes for Interior Compartments X1.2.1 Typical Extrication Equipment Might Include X1.2.2 Prepurchase Checklist X2 Rationale X3
标准号:
ASTM F1230-89
标准名称:
Specification for Minimum Performance Requirements for Emergency Medical Service (EMS) Ground Vehicles (Withdrawn 1997)
英文名称:
Specification for Minimum Performance Requirements for Emergency Medical Service (EMS) Ground Vehicles (Withdrawn 1997)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- BS EN ISO 6224:2024 - TC . Specification
- BS ISO/IEC 15426-2:2023 conformance specification
- BS EN ISO/ASTM 52915:2020 Specification for additive manufacturing file format (AMF) Version 1.2
- 24/30474967 DC test specification - Direct Part Mark (DPM)
- BS EN ISO 6224:2024 Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
- BS EN ISO 4641:2024 Rubber hoses and hose assemblies for water suction and discharge. Specification
- BS EN ISO 5771:2024 - TC Tracked Changes. Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification
- PAS 4441:2024 Components used in hydrogen gas metering. Specification
- BS 5106:2024 Dimensions of spiral anti-extrusion back-up rings and their housings. Specification
- BS EN ISO 17871:2020+A1:2024 Gas cylinders. Quick-release cylinder valves. Specification and type testing
- BS EN ISO 5771:2024 Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification
- 24/30465245 DC , strength class 1 100 MPa. Procurement specification
- BS ISO/IEC 24778:2024 - TC . Aztec Code bar code symbology specification
- BS ISO/IEC 23415:2024 Information technology. Data Format Description Language (DFDL) v1.0 Specification
- BS EN ISO 10297:2024 - TC Tracked Changes. Gas cylinders. Cylinder valves. Specification and type testing