- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国际标准 >>
- 11.080.01 >>
- ISO 18362:2016/Amd 1:2022 EN 1310eba1
【国际标准】 Manufacture of cell-based health care products — Control of microbial risks during processing — Amendment 1
本网站 发布时间:
2024-05-11
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
暂无
标准号:
ISO 18362:2016/Amd 1:2022 EN
标准名称:
Manufacture of cell-based health care products — Control of microbial risks during processing — Amendment 1
英文名称:
Manufacture of cell-based health care products — Control of microbial risks during processing — Amendment 1标准状态:
现行-
发布日期:
2022-06-21 -
实施日期:
出版语种:
EN
- 其它标准
- 上一篇: ISO 11359-2:2021 EN 69ceb46f Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
- 下一篇: ISO 3067:1983 EN a57f4982 Cinematography — Motion-picture camera cartridge, 8 mm Type S, Model I — Notches for film speed, film identification and colour-balancing filter — Dimensions and positions
- 推荐标准
- 国家标准计划
- ISO 17665:2024 EN 55d5bf6c Sterilization of health care products — Moist heat — Requirements for the development, validation and routine control of a sterilization process for medical devices
- ISO 11139:2018/Amd 1:2024 EN 894d7d27 Sterilization of health care products — Vocabulary of terms used in sterilization and related equipment and process standards — Amendment 1: Amended and additional terms and definitions
- ISO 13408-1:2023 EN f2bdeb5d Aseptic processing of health care products — Part 1: General requirements
- ISO 11737-3:2023 EN 5cfd4d4e Sterilization of health care products — Microbiological methods — Part 3: Bacterial endotoxin testing
- ISO/TS 5111:2022 EN 0a013465 Guidance on quality of water for sterilizers, sterilization and washer-disinfectors for health care products
- ISO 11140-6:2022 EN 70e8b005 Sterilization of health care products — Chemical indicators — Part 6: Type 2 indicators and process challenge devices for use in performance testing of small steam sterilizers
- ISO 13004:2022 EN 3163502c Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VDmaxSD
- ISO 22441:2022 EN a0c5db25 Sterilization of health care products — Low temperature vaporized hydrogen peroxide — Requirements for the development, validation and routine control of a sterilization process for medical devices
- ISO 18362:2016/Amd 1:2022 EN 1310eba1 Manufacture of cell-based health care products — Control of microbial risks during processing — Amendment 1
- ISO 11137-2:2013/Amd 1:2022 EN 21f45979 Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose — Amendment 1
- ISO 25424:2018/Amd 1:2022 EN 4f4cde00 Sterilization of health care products — Low temperature steam and formaldehyde — Requirements for development, validation and routine control of a sterilization process for medical devices — Amendment 1
- ISO 11138-8:2021 EN 35fa07aa Sterilization of health care products — Biological indicators — Part 8: Method for validation of a reduced incubation time for a biological indicator
- ISO 17664-1:2021 EN a71b1df6 Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices — Part 1: Critical and semi-critical medical devices
- ISO 11737-1:2018/Amd 1:2021 EN b9d712c5 Sterilization of health care products — Microbiological methods — Part 1: Determination of a population of microorganisms on products — Amendment 1
- ISO 13408-6:2021 EN 7ab72f2e Aseptic processing of health care products — Part 6: Isolator systems