
【国外标准】 IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors
本网站 发布时间:
2025-04-28
- IEEE C57.152-2013
- 定价: 191元 / 折扣价: 163 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This guide describes diagnostic field tests and measurements that are performed on fluid-filled power transformers and regulators. Whenever possible, shunt reactors are treated in a similar manner to transformers. The tests are presented systematically in categories depending on the subsystem of the unit being examined. A diagnostic chart is included as an aid to identifying the various subsystems. Additional information is provided regarding specialized test and measuring techniques.… read more Interpretive discussions are also included in several areas to provide additional insight on the particular test or to provide guidance on acceptance criteria. These discussions are based on the authors’ judgment of accepted practice. It should be noted that the results of several types of tests should be interpreted together to diagnose a problem. Manufacturers’ acceptance criteria and other standards in the IEEE C57™ series take precedence over the content of this guide. read less
标准号:
IEEE C57.152-2013
标准名称:
IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6792-23c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM E136-24c Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
- ASTM E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- ASTM E2013-20 Standard Practice for Developing Functions, Constructing FAST Diagrams, and Performing Function Analysis During Value Engineering (VE)/Value Analysis (VA) Study
- ASTM C1012/C1012M-24a Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
- ASTM C1032/C1032M-24 Standard Specification for Woven Wire Plaster Base
- ASTM C1037-16(2024) Standard Practice for Inspection of Underground Precast Concrete Utility Structures
- ASTM C1040/C1040M-24 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
- ASTM C1059/C1059M-24 Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
- ASTM C1077-25 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- ASTM C11-24a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
- ASTM C1105-23a Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
- ASTM C1130-24 Standard Practice for Calibration of Thin Heat Flux Transducers
- ASTM C1154-24 Standard Terminology for Fiber-Reinforced Cement Products
- ASTM C1154-24a Standard Terminology for Fiber-Reinforced Cement Products