【国外标准】 Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill (Withdrawn 2019)
本网站 发布时间:
2024-02-28
- ASTM C1082-98(2014)
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
This specification covers three classes of flat asbestos-cement sheets for use as cooling tower fill. Specifically excluded from this specification are asbestos-cement products intended for use as: tower partitioning and casing materials, splash bars, water distribution conduits, and demisters; and corrugated sheets and splash bars used as cooling tower fill (heat exchange surfaces). Materials shall be classified into the following types: Type I, fill consisting of autoclaved pressed sheets without textured surfaces; Type II, fill consisting of non-autoclaved pressed sheets without textured surfaces; Type III, fill consisting of non-autoclaved, non-pressed sheets with textured surfaces. Asbestos-cement sheets shall conform to specified manufacturing (autoclave, pressing, texture, and thickness), composition (cement:silica ratio, mineral diluents, cellulose, organic content, and cement type), and performance (apparent density, mater absorption, flexural modulus of rupture, minimum deflection, freeze-thaw resistance, Harkort test, and free lime) requirements.1.1 This specification covers three classes of flat asbestos-cement sheets for use as cooling tower fill.1.2 Specifically excluded from this specification are asbestos-cement products intended for use as tower partitioning and casing materials, splash bars, water distribution conduits, and demisters. Also excluded are corrugated sheets and splash bars used as cooling tower fill (heat exchange surfaces) that are covered in Specification C1081.1.3 The values stated in the SI system are to be regarded as the standard. The inch-pound units in parentheses are provided for information only.1.4 Warning—Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysotile asbestos, refer to “Safe Use of Chrysotile: A Manual on Preventive and Control Measures.”21.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM C1082-98(2014)
标准名称:
Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill (Withdrawn 2019)
英文名称:
Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill (Withdrawn 2019)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- BS EN IEC 61753-082-02:2024 Fibre optic interconnecting devices and passive components. Performance standard
- BS ISO 5501-2:2024 Tobacco heating systems. Definitions and standard conditions for aerosol generation and collection
- BS ISO 5501-3:2024 Tobacco heating systems. Definitions and standard conditions for aerosol generation and collection
- BS ISO 5501-1:2024 Tobacco heating systems. Definitions and standard conditions for aerosol generation and collection
- BS ISO 24138:2024 Information and documentation. International Standard Content Code (ISCC)
- 24/30492859 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard
- BS EN IEC 61753-071-02:2020+A1:2024 Fibre optic interconnecting devices and passive components. Performance standard
- 24/30491443 DC standard
- KS D ISO 9226 금속 및 합금의 부식-대기의 부식성-부식성 평가를 위한 표준 시험편의 부식 속도 결정
- KS B 0831 비파괴검사 — 초음파탐상검사 — 표준 시험편
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication