
【国外标准】 Specification for sheet and strip of 99% aluminium (temper designation-O)
本网站 发布时间:
2023-12-22
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
BS 6L 17:1985
标准名称:
Specification for sheet and strip of 99% aluminium (temper designation-O)
英文名称:
Specification for sheet and strip of 99% aluminium (temper designation-O)标准状态:
现行-
发布日期:
1985-12-31 -
实施日期:
出版语种:
- 推荐标准
- ASTM A6/A6M-24a Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- ASTM C957/C957M-17(2024) Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface
- ASTM D2555-17a(2024)e1 Standard Practice for Establishing Clear Wood Strength Values
- ASTM D7065-17(2024) Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
- ASTM D7731-17(2024) Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM D8028-17(2024) Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
- ASTM E3124-17 Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
- ASTM F2890-17(2024) Standard Guide for Hazard Awareness for Search and Rescue Personnel
- ASTM D3775-17(2023) Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
- ASTM D3985-17 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
- ASTM D4068-17(2022) Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
- ASTM D4103-17 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
- ASTM D4188-17 Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water
- ASTM D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
- ASTM D4307-17(2021) Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards