- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- BSI >>
- BS EN 17844:2023 Construction products: Assessment of release of dangerous substances. Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX). Gas chromatographic method with mass spectrometric detection

【国外标准】 Construction products: Assessment of release of dangerous substances. Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX). Gas chromatographic method with mass spectrometric detection
本网站 发布时间:
2024-11-18
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
BS EN 17844:2023
标准名称:
Construction products: Assessment of release of dangerous substances. Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX). Gas chromatographic method with mass spectrometric detection
英文名称:
Construction products: Assessment of release of dangerous substances. Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX). Gas chromatographic method with mass spectrometric detection标准状态:
现行-
发布日期:
2023-11-27 -
实施日期:
出版语种:
- 其它标准
- 上一篇: BS EN 17841:2024 Chemical used for treatment of water intended for human consumption. Antifouling for membranes. Sulphamic acid
- 下一篇: BS EN 17845:2023 Construction products: Assessment of release of dangerous substances. Determination of biocide residues using liquid chromatography with mass spectrometric detection (LC-MS/MS)
- 推荐标准
- AS EN 12079.1-2010 Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD)
- AS EN 12079.2-2010 Offshore containers and associated lifting sets Lifting sets - Design, manufacture and marking (EN 12079-2:2006, MOD)
- AS EN 12182-2002 Technical aids for disabled persons - General requirements and test methods
- AS EN 50064-2008 Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
- AS/NZS 2023:1995 Baths for ablutionary purposes
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1033-18(2023) Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
- ASTM A1071/A1071M-11(2023) Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
- ASTM A1079-17(2023) Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM A1095-15(2023) Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
- ASTM A126-04(2023) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
- ASTM A387/A387M-17a(2023) Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
- ASTM A435/A435M-17(2023) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
- ASTM A474-03(2023) Standard Specification for Aluminum-Coated Steel Wire Strand
- ASTM A517/A517M-17(2023) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered