【国外标准】 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part ThreeUsage Descriptors (Withdrawn 2016)
本网站 发布时间:
2024-02-28
- ASTM D5410-93(2007)
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
Data at groundwater sites are gathered for many purposes. Each of these purposes generally requires a specific set of data elements. For example, when the groundwater quality is of concern not only are the minimum set of data elements required for the site, but information concerning the sample collection depth interval, method of collection, and date and time of collection are needed to fully qualify the data. Another group of elements are recommended for each use of the data, such as aquifer characteristics or water-level records. Normally the more information that is gathered about a site by field personnel, the easier it is to understand the groundwater conditions and to reach valid conclusions and interpretations regarding the site. The data elements listed in this guide and Guides D5408 and D5409 should assist in planning what information can be gathered for a groundwater site and how to document these data. Note 6—Some important data elements may change during the existence of a site. For example, the elevation of the measuring point used for the measurement of water levels may be modified because of repair or replacement of equipment. This frequently occurs when the measuring point is an opening in the pump and the pump is modified or replaced. Because changes cannot always be anticipated. It is preferable to reference the height of the measuring point to a nearby, permanent altitude datum. The measuring point is referenced by being the same altitude (zero correction) or above (negative correction) or below (plus correction) the altitude datum. All appropriate measurements should be corrected in reference to the altitude datum before entry into the permanent file. Care must be exercised to keep the relationship of these data elements consistent throughout the duration of the site. Some data elements have an extensive list of components or possible entries. For example the aquifer identification list described in Guide D5409 has over 5000 entries. Lengthy lists of possible entries are not included in this guide, however, information on where to obtain these components is included with the specific data element. Note 7—This guide identifies sources, lists, etc. of information required to completely document information about any groundwater site.1.1 This guide is Part Three of three guides to be used in conjunction with Practice D5254 that delineates the data desirable to describe a groundwater data collection or sampling site. This guide identifies usage descriptors, such as monitoring, for an individual groundwater site. Guide D5408 describes additional information beyond the minimum set of data elements that may be specified to identify a groundwater site, while Guide D5409 identifies physical descriptors, such as construction, for a site. Note 1—A groundwater site is defined as any source, location, or sampling station capable of producing water or hydrologic data from a natural stratum from below the surface of the earth. A source or facility can include a well, spring or seep, and drain or tunnel (nearly horizontal in orientation). Other sources, such as excavations, driven devices, boreholes, ponds, lakes, and sinkholes, that can be shown to be hydraulically connected to the groundwater, are appropriate for the use intended. Note 2—Guide D5408 includes data confidence classification descriptor (1 element), geographic location descriptors (4 elements), political regime descriptor (1 element), source identifier descriptors (4 elements), legal descriptors (9 elements), owner descriptors (2 elements), site visit descriptors (3 elements), other identification descriptors (2 elements), other data descriptors (3 elements), and remarks descriptors (3 elements). Guide D5409 includes individual site characteristics (7 data elements), construction descriptors (56 data elements), lift descriptors (16 data elements), geologic descriptors (26 data elements), hydraulic descriptors (20 data elements), and spring descriptors (11 data elements). For a list of descriptors in this guide, see Section 3. 1.2 These data elements are described in terms used by groundwater hydrologists. Standard references, such as Ref (1) and various hydrogeologic professional publications, are used to determine these definitions. Many of the suggested elements and their representative codes are those established by the Water Resources Division of the U.S. Geological Survey and used in the National Water Information Systems computerized data base (1-21). Note 3—The purpose of this guide is to suggest data elements that can be collected for groundwater sites. This does not uniquely imply a computer data base, but rather data elements for entry into any type of permanent file. Note 4—Component and code lists given with some of the data elements, for example“ method of discharge measurement,” are only suggestions. These lists can be modified, expanded, or reduced for the purpose intended by the company or agency maintaining the groundwater data file. Note 5—Use of trade names in this guide is for identification purposes only and does not constitute endorsement by ASTM. 1.3 This guide includes the data elements desirable to document a groundwater site beyond those given in the minimum set of data elements. Some examples of the data elements are water level, discharge, and water-quality sample collection date. No single site will need every data element, for example, a monitoring site may not need a long-term water use record. Each record (group of data elements) for a site has mandatory data elements, such as the date for the water level record. However, these elements are considered necessary only when that specific record is gathered for the site. 1.4 The values stated in both inch-pound and SI units are to be regarded separately as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.
标准号:
ASTM D5410-93(2007)
标准名称:
Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part ThreeUsage Descriptors (Withdrawn 2016)
英文名称:
Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part ThreeUsage Descriptors (Withdrawn 2016)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- BS EN IEC 61753-081-02:2023 Fibre optic interconnecting devices and passive components. Performance standard