
【国外标准】 Geographic information -- Imagery sensor models for geopositioning -- Part 2: SAR, InSAR, lidar and sonar (Technical Report)
本网站 发布时间:
2022-07-01
- INCITS/ISO TS 19130-2:2014 [2015]
- 现行
- 定价: 546元 / 折扣价: 465 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
ISO/TS 19130-2:2014 supports exploitation of remotely sensed images. It specifies the sensor models and metadata for geopositioning images remotely sensed by Synthetic Aperture Radar (SAR), Interferometric Synthetic Aperture Radar (InSAR), LIght Detection And Ranging (lidar), and SOund Navigation And Ranging (sonar) sensors. The specification also defines the metadata needed for the aerial triangulation of airborne and spaceborne images.ISO/TS 19130-2:2014 specifies the detailed information that shall be provided for a sensor description of SAR, InSAR, lidar, and sonar sensors with the associated physical and geometric information necessary to rigorously construct a physical sensor model. For the case where precise geoposition information is needed, this Technical Specification identifies the mathematical formulae for rigorously constructing physical sensor models that relate two-dimensional image space to three-dimensional ground space and the calculation of the associated propagated error.ISO/TS 19130-2:2014 does not specify either how users derive geoposition data or the format or content of the data the users generate.
标准号:
INCITS/ISO TS 19130-2:2014 [2015]
标准名称:
Geographic information -- Imagery sensor models for geopositioning -- Part 2: SAR, InSAR, lidar and sonar (Technical Report)
英文名称:
Geographic information -- Imagery sensor models for geopositioning -- Part 2: SAR, InSAR, lidar and sonar (Technical Report)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO TS 19130-2:2014 (R2020) Geographic information -- Imagery sensor models for geopositioning -- Part 2: SAR, InSAR, lidar and sonaR, a Technical Specification prepared by INCITS and registered with ANSI
- 下一篇: INCITS/ISO TS 19130:2010 [2015] Geographic information - Imagery sensor models for geopositioning
- 推荐标准
- ASTM E2760-19e2 Standard Test Method for Creep-Fatigue Crack Growth Testing
- AS 2213.2-1998 Commercial road vehicles - Mechanical connections between towing vehicles 50 mm pin-type couplings and drawbar eyes
- AS 2213.2-2001 Commercial road vehicles - Mechanical connections between towing vehicles 50 mm pin-type couplings and drawbar eyes
- AS 2219.2.1-1978 Methods of test for vitreous enamel coatings Physical tests - Determination of resistance of vitreous enamel coatings on steel to thermal shock
- AS 2220.2-1989/Amdt 2-1993 Emergency warning and intercommunication systems in buildings - System design, installation and commissioning
- AS 2224.2-1986 Medicine measures (including paediatric droppers) Plastics - For domestic use
- AS 2247.2-1999 (R2013) Eucalyptus oil fractions Eucalyptus oil terpenes (phellandrene fraction)
- AS 2275.2-1979 Combustible gas detection instruments for use in explosive atmospheres Performance requirements
- AS 2300.1.2.2-1988 Methods of chemical and physical testing for the dairying industry General methods and principles - Determination of nitrogen - Nitrogen fractions from milk
- AS 2300.1.8.2-1991 Methods of chemical and physical testing for the dairying industry General methods and principles - Assessment of instrumental methods - Infrared spectrometric analysis of milk
- AS 2300.2.6-1988 Methods of chemical and physical testing for the dairying industry Liquid milks - Determination of lactose
- AS 2300.2.8-1988 Methods of chemical and physical testing for the dairying industry Liquid milks - Determination of chloride
- AS 2300.6.5-1990 (R2019)/Amdt 2-1997 Methods of chemical and physical testing for the dairying industry - Cheese - Determination of salt
- AS 2300.8.2-1983 Methods of chemical and physical testing for the dairying industry Anhydrous milk fat - Moisture
- AS 2311-1992/Amdt 2-1997 The painting of buildings