
【国外标准】 Guide for Acceptance and Maintenance of Insulating Oil in Equipment
本网站 发布时间:
2025-04-28
- IEEE C57.106-2002
- 定价: 127元 / 折扣价: 108 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This guide discusses and recommends analytical test and evaluation procedures for acceptance and use of conventional petroleum (mineral) dielectric oils. Minimum standards, methods of maintenance for these fluids and levels at which these methods become necessary and included. The mineral oils covered in this guide are used in transformers, voltage regulators, switchgear, reactors, circuit breakers and load tap changers. The Characteristic of the oils discussed in this guide does not include oil that is in factory fill lines nor does this guide cover reclaimed oil installed in new equipment. The qualities of such oil, if used, should be agreed upon by the manufacturer and the user of equipment.
标准号:
IEEE C57.106-2002
标准名称:
Guide for Acceptance and Maintenance of Insulating Oil in Equipment
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6792-23c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- AS 2560.2.3-2002 Sports lighting Specific applications - Lighting for football (all codes)
- AS 2567-2002 Laminar flow cytotoxic drug safety cabinets
- AS 2638.2-2002 Gate valves for waterworks purposes Resilient seated
- AS 2741-2002/Amdt 2-2008 Shackles
- AS 2805.2-2000/Amdt 1-2002 Electronic funds transfer - Requirements for interfaces Message structure, format and content
- AS 2832.5-2002 Cathodic protection of metals Steel in concrete structures
- AS 2870-1996/Amdt 3-2002 Residential slabs and footings - Construction
- AS 2879.9-2002 (R2013) Alumina Determination of flow time
- AS 2885.2-2002 Pipelines - Gas and liquid petroleum Welding
- AS 2890.2-2002 Parking facilities Off-street commercial vehicle facilities
- AS 2971-2002 Serially produced pressure vessels
- AS 3750.18-2002 (R2013) Paints for steel structures Moisture cure urethane (single-pack) systems
- AS 3894.2-2002 (R2013) Site testing of protective coatings Non-conductive coatings - Continuity testing - Wet sponge method
- AS 3894.4-2002 (R2013) Site testing of protective coatings Assessment of degree of cure