【国外标准】 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Grass Trimmers and Brushcutters - Safety and Environmental Requirements
本网站 发布时间:
2024-04-10
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
The requirements of this Standard apply to: a) Internal combustion engine杙owered, hand-held, grass trimmers intended for use with flexible nonmetallic line, or other types of nonmetallic cutting attachments, and b) Internal combustion engine杙owered, hand-held, brushcutters intended for use with cutting blades and other cutting attachments. NOTE ?If a grass trimmer is marketed by the manufacturer as convertible to a brushcutter, then the converted unit shall comply with requirements for brushcutters and vice-versa. A convertible unit may be marketed as a grass trimmer or a brushcutter without including the devices required for conversion in the packaging, provided the operator manual clearly addresses the need to acquire and use the required conversion devices and the manufacturer makes such devices available as optional equipment.
标准号:
ANSI/OPEI B175.3-2019
标准名称:
Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Grass Trimmers and Brushcutters - Safety and Environmental Requirements
英文名称:
Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Grass Trimmers and Brushcutters - Safety and Environmental Requirements标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ANSI/OPEI B175.2-2012 (R2019) Outdoor Power Equipment - Internal Combustion Engine-Powered Handheld and Backpack Blowers and Blower-Vacuums - Safety Requirements and Performance Testing Procedures
- 下一篇: ANSI/OPEI B175.4-2018 (R2024) Outdoor Power Equipment - Portable, Handheld, Internal Combustion Engine-Powered Cut-Off Machines - Safety and Environmental Requirements
- 推荐标准
- ASTM B887-24 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
- AS 1799.3-1985 Small pleasure boats code Engineering
- AS 1807.3-1989 Cleanrooms, workstations and safety cabinets - Methods of test Determination of air velocity and uniformity of air velocity in laminar flow cleanrooms
- AS 1926.3-2010 (R2016)/Amdt 1-2011 Swimming pool safety Water recirculation systems
- AS 2001.2.3-1988 Methods of test for textiles Physical tests - Determination of breaking force and extension of textile fabrics
- AS 2081.3-1988 Electrical equipment for coal and shale mines - Electrical protection devices Earth-leakage protection devices for use on systems incorporating earth-fault current limiters
- AS 2118.3-1997 Automatic fire sprinkler systems Deluge
- AS 2205.3.3-1997 Methods for destructive testing of welds in metal - Longitudinal guided bend test
- AS 2219.1.3-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to boiling hydrochloric acid
- AS 2252.3-2011 Controlled environments Biological safety cabinets Class III - Design
- AS 2276.3-1992 Cables for traffic signal installations Loop cable for vehicle detectors
- AS 2290.3-1990 Electrical equipment for coal mines - Maintenance and overhaul Maintenance of gas detecting and monitoring equipment
- AS 2300.1.3-1988 Methods of chemical and physical testing for the dairying industry General methods and principles - Determination of fat - Gravimetric method
- AS 2300.6.5-1990 (R2019)/Amdt 1-1992 Methods of chemical and physical testing for the dairying industry - Cheese - Determination of salt
- AS 2300.6.5-1990 (R2019)/Amdt 2-1997 Methods of chemical and physical testing for the dairying industry - Cheese - Determination of salt
我的标准
购物车
400-168-0010










