
【国外标准】 Methods for determination of lead in magnesium and magnesium alloys
本网站 发布时间:
2024-10-15
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
JIS H 1343:2008e
标准名称:
Methods for determination of lead in magnesium and magnesium alloys
英文名称:
Methods for determination of lead in magnesium and magnesium alloys标准状态:
现行-
发布日期:
2008-07-20 -
实施日期:
出版语种:
- 推荐标准
- AS EN 50064-2008 Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
- AS IEC 60812-2008 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
- AS ISO 12647.2-2008 Graphic technology - Process control for the production of half-tone colour separations, proof and production prints Offset lithographic processes
- AS/NZS 1158.0:2005/Amdt 1:2008 Lighting for roads and public spaces Introduction
- AS/NZS 1158.2:2005/Amdt 1:2008 Lighting for roads and public spaces Computer procedures for the calculation of light technical parameters for Category V and Category P lighting
- AS/NZS 1301.421:2008 Methods of test for pulp and paper Determination of pH of aqueous extracts - Cold extraction method
- AS/NZS 1546.1:2008 On-site domestic wastewater treatment units Septic tanks
- AS/NZS 1680.2.2:2008 Interior and workplace lighting Specific applications - Office and screen-based tasks
- AS/NZS 1680.2.3:2008 Interior and workplace lighting Specific applications - Educational and training facilities
- AS/NZS 1826:2008 Electrical equipment for explosive gas atmospheres - Special protection - Type of protection 's'
- AS/NZS 1891.1:2007/Amdt 2:2008 Industrial fall-arrest systems and devices Harness and ancillary equipment
- AS/NZS 2032:2006/Amdt 1:2008 Installation of PVC pipe systems
- AS/NZS 2033:2008/Amdt 2:2009 Installation of polyethylene pipe systems
- AS/NZS 2269.1:2008 Plywood - Structural Determination of structural properties - Test methods
- AS/NZS 2293.2:1995/Amdt 2:2008 Emergency escape lighting and exit signs for buildings Inspection and maintenance