
【国外标准】 Standard Specification for Nuclear Facility Transient Worker Records
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 The standardization of nuclear facility transient worker records will provide the individual transient worker with a greater assurance that the radiation doses that may be received are within regulatory limits.4.2 This specification establishes a fixed content for nuclear facility transient worker records. Standardizing the content of these records will facilitate interfacing with industry-wide record keeping systems, such as the Nuclear Energy Institute (NEI) Personnel Data System (PADS).4.3 The standardization of nuclear facility transient worker records will reduce the time required for in-processing of these workers.AbstractThis specification covers the required content and provides retention requirements for records needed for in-processing of nuclear facility transient workers. This specification is not intended to cover specific skills records (such as equipment operating licenses, ASME inspection qualifications, or welding certifications), nor does it reduce any regulatory requirement for records retention at a licensed nuclear facility. Rather, the records shall contain data elements for the following information: worker identification; occupational external radiation exposure; occupational internal radiation exposure; lifetime occupational radiation exposure history; security screening; medical approval; and radiation worker training.1.1 This specification covers the required content and provides retention requirements for records needed for in-processing of nuclear facility transient workers.1.2 This specification applies to records to be used for in-processing only.1.3 This specification is not intended to cover specific skills records (such as equipment operating licenses, ASME inspection qualifications, or welding certifications).1.4 This specification doesPresident Barack Obama eulogy at John Lewis funeral not reduce any regulatory requirement for records retention at a licensed nuclear facility.NOTE 1: Nuclear facilities operated by the U.S. Department of Energy (DOE) are not licensed by the U.S. Nuclear Regulatory Commission (NRC), nor are other nuclear facilities that may come under the control of the U.S. Department of Defense (DOD) or individual agreement states. The references in this specification to licensee, the U.S. NRC Regulatory Guides, and Title 10 of the U.S. Code of Federal Regulations are to imply appropriate alternative nomenclature with respect to DOE, DOD, or agreement state nuclear facilities. This distinction does not alter the required content of records needed for in-processing of nuclear facility transient workers.NOTE 2: This specification does not define the form of the required worker records (such as a passport or central computerized record keeping system).1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1034-95(2020)
标准名称:
Standard Specification for Nuclear Facility Transient Worker Records
英文名称:
Standard Specification for Nuclear Facility Transient Worker Records标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM E1033-13 Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature (Withdrawn 2019)
- 下一篇: ASTM E1035-18(2023) Standard Practice for Determining Neutron Exposures for Nuclear Reactor Vessel Support Structures
- 推荐标准
- ASTM E866-23 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
- ASTM E867-23 Standard Terminology Relating to Vehicle-Pavement Systems
- ASTM E870-82(2019) Standard Test Methods for Analysis of Wood Fuels
- ASTM E871-82(2019) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM E872-82(2019) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
- ASTM E874-19 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
- ASTM E875-20 Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry
- ASTM E877-21 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
- ASTM E878-20 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
- ASTM E879-20 Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements
- ASTM E88-11(2017) Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
- ASTM E882-10(2016)e1 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
- ASTM E887-21 Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
- ASTM E889-82(2023) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
- ASTM E90-23 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements