【国外标准】 IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above
本网站 发布时间:
2025-10-27
- IEEE 434-2006
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This guide describes a procedure that may be used to evaluate and compare insulation systems used, or proposed for use, in large ac electric machines. The tests outlined herein are applicable to the groundwall insulation systems applied to form-wound, pre-insulated armature (stator) winding coils and/or bars of generators, motors, and synchronous condensers rated 2300 V or higher. The basic component of these insulation systems is usually mica combined with reinforcing, bonding, and… read more impregnating materials. This guide is based on the experience of the industry with mica-based systems; any evaluation of other insulation systems should, however, consider the requirements of this guide. This document is not intended for use as a manufacturer's quality assurance test plan. Nor should it be used for specifying or procuring armature winding coils/bars. read less
标准号:
IEEE 434-2006
标准名称:
IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2805.4.1-2001 (R2016)/Amdt 1-2006 Electronic funds transfer - Requirements for interfaces Message authentication - Mechanism using a block cipher
- AS 3524-2006 Identification cards - Financial transaction cards
- AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospace
- AS 3775.1-2004/Amdt 1-2006 Chain slings - Grade T Product specification
- AS 3776-2006 Lifting components for Grade T chain slings
- AS 3785.1-2006 Underground mining - Shaft equipment Shaft overwind safety catch system
- AS 3785.7-2006/Amdt 1-2011 Underground mining - Shaft equipment Sheaves
- AS 3806-2006 Compliance programs
- AS 3818.7-2006 Timber - Heavy structural products - Visually graded Large cross-section sawn hardwood engineering timbers
- AS 3853.1-2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone Sampling of airborne particles
- AS 3998-2006 Non-destructive testing - Qualification and certification of personnel
- AS 4024.1201-2006 Safety of machinery General principles - Basic terminology and methodology
- AS 4024.1301-2006 Safety of machinery Risk assessment - Principles of risk assessment
- AS 4024.1302-2006 Safety of machinery Risk assessment - Reduction of risks to health and safety from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers
- AS 4024.1601-2006 Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards

我的标准
购物车
400-168-0010








