
【国外标准】 Approval and test specification - Medical electrical equipment Particular requirements for safety - Diagnostic and therapeutic laser equipment
本网站 发布时间:
2021-03-22
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
AS/NZS 3200.2.22:1997
标准名称:
Approval and test specification - Medical electrical equipment Particular requirements for safety - Diagnostic and therapeutic laser equipment
英文名称:
Approval and test specification - Medical electrical equipment Particular requirements for safety - Diagnostic and therapeutic laser equipment标准状态:
被代替-
发布日期:
1997-06-05 -
实施日期:
出版语种:
- 其它标准
- 上一篇: AS/NZS 3200.2.21:1994/Amdt 1:1998 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Infant radiant warmers
- 下一篇: AS/NZS 3200.2.23:1994 Approval and test specification - Medical electrical equipment Particular requirements for safety - Transcutaneous partial pressure monitoring equipment
- 推荐标准
- ASTM C1531-22 Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index
- ASTM C1569-22 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
- ASTM C1570-22 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
- ASTM C1635-22 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
- ASTM C1710-22 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
- ASTM C1715/C1715M-22 Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
- ASTM C1812/C1812M-22 Standard Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests
- ASTM C1837-22 Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures
- ASTM C1866/C1866M-22 Standard Specification for Ground-Glass Pozzolan for Use in Concrete
- ASTM C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
- ASTM C1894-22 Standard Guide for Microbially Induced Corrosion of Concrete Products
- ASTM C1925-22 Standard Test Method for Strength Properties of Direct Hung, Suspended T-bar Type Ceiling System Components Intended to Receive Gypsum Panel Products
- ASTM C199-22 Standard Test Method for Pier Test for Refractory Mortars
- ASTM C203-22 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C212-22 Standard Specification for Structural Clay Facing Tile