
【国外标准】 Gully tops and manhole tops for vehicular and pedestrian areas; classification, design requirements, testing, inspection and marking
本网站 发布时间:
2025-06-05
- DIN 1229
- 废止
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
DIN 1229
标准名称:
Gully tops and manhole tops for vehicular and pedestrian areas; classification, design requirements, testing, inspection and marking
英文名称:
标准状态:
废止-
发布日期:
2001-03-01 -
实施日期:
出版语种:
- 其它标准
- 上一篇: DIN 51915 Testing of carbonaceous materials; determination of dynamic modulus of elasticity by the resonance method; solids
- 下一篇: DIN 18555-4 Testing of mortars containing mineral binders; hardened mortars; determination of linear and transverse strain and of deformation characteristics of masonry mortars by the static pressure test
- 推荐标准
- ASTM C1229-94(2023) Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
- JIS A 1229:2007 Geotextiles and geotextile-related products -- Procedure for simulating damage under interlocking concrete block pavement (Roller compactor method)
- ASTM D1229-03(2019) Standard Test Method for Rubber Property—Compression Set at Low Temperatures
- AS/NZS 1229:1997 Laundry troughs and tubs
- ASTM E1229-21 Standard Specification for Calcium Hypochlorite
- KS C 1229 안압계
- ASTM F1229-01(2016) Standard Guide for Qualification and Training of EMS Air Medical Patient Care Providers (Withdrawn 2025)
- JIS G 1229:1994 Steel -- Methods for determination of lead content
- AS/NZS 1229:2002 (R2017) Laundry troughs and tubs
- DIN EN 10222-4/A1 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength; German and English version EN 10222-4:2017/prA1:2019
- DIN EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
- DIN EN 10226-2 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
- DIN EN 10226-3 Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges
- DIN EN 10229 Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
- DIN EN 1023-3 Office furniture - Screens - Part 3: Test methods; English version of DIN EN 1023-3