
【国外标准】 Large Metallic Valves for Gas Distribution Manually Operated, NPS 2½ (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
本网站 发布时间:
2025-06-05
- ASME B16.38-2023
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This Standard applies to new valve construction and covers quarter turn manually operated metallic valves in sizes NPS 4 1â??4 and tubing sizes 1 1â??4 O.D. These valves are intended for indoor installation as gas shutoff valves when installed in aboveground fuel gas piping downstream of the gas meter outlet and upstream of the inlet connection to a gas appliance. The valves covered by this Standard are intended for service at temperatures between 32F (0C) and 125F (52C) at pressure ratings not to exceed 5 psi (0.34 bar). When so designated by the manufacturer, these valves may be installed for service outdoors and/or at temperatures below 32F (0C) and/or above 125F (52C).
标准号:
ASME B16.38-2023
标准名称:
Large Metallic Valves for Gas Distribution Manually Operated, NPS 2½ (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
英文名称:
Large Metallic Valves for Gas Distribution - Manually Operated, NPS 2½ (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ANSI X9.104-1-2004 (R2023) Financial transaction card originated messages - Card acceptor to acquiring host messages - Part 1: Messages, data elements and code values
- ANSI X9.104-2-2004 (R2023) Financial transaction card originated messages - Card acceptor to acquiring host messages - Part 2: Convenience store and petroleum marketing industry
- ANSI/OPEI B175.2-2012 (R2019) Outdoor Power Equipment - Internal Combustion Engine-Powered Handheld and Backpack Blowers and Blower-Vacuums - Safety Requirements and Performance Testing Procedures
- ANSI/OPEI B175.6-2018 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Hedge Trimmers - Safety and Environmental Requirements
- ANSI/OPEI B175.7-2019 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Pole Mounted Pruners - Safety and Environmental Requirements
- ASTM E1799-12(2023) Standard Practice for Visual Inspections of Photovoltaic Modules
- ASTM E1804-16(2023) Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
- ASTM E1815-18(2023) Standard Test Method for Classification of Film Systems for Industrial Radiography
- ASTM E1820-23b Standard Test Method for Measurement of Fracture Toughness
- ASTM E1890-11(2023) Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment
- ASTM E1927-98(2023) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
- ASTM E1946-18(2023) Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
- ASTM E1960-07(2023) Standard Practice for Calculating International Friction Index of a Pavement Surface
- ASTM E1965-98(2023) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
- ASTM E1994-09(2023) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans