
【国外标准】 Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment
本网站 发布时间:
2024-02-28
- ASTM F1297-90(2023)
- Active
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
3.1 The symbols depicted represent the following:3.1.1 Equipment required during evacuation or rescue,3.1.2 Location of muster stations in preparation for evacuation or rescue, or3.1.3 The sequence of events for operation of survival craft.3.2 Where station numbers are used with another symbol, they should be abutted to the right hand side of the other symbol.3.3 Arrows may be used with any other symbol and, where feasible, should point in the direction of the equipment or station by being abutted to the symbol on the edge toward which the arrow is pointing.3.4 Symbols that indicate station or equipment location should be in white on a green background (see Figs. 1 and 2).3.5 Symbols that specify the operating sequence of survival craft should be in white on a blue background (see Fig. 3).3.6 Symbols used as legends in station bills, lifesaving equipment arrangement plans or drawings, or other posters, need not meet the dimensions specified in 3.7.3.7 Symbols used as markers to indicate the location of stations or equipment should be sized in accordance with 3.7.1 or 3.7.2.3.7.1 Station number symbol dimensions should be a minimum of 150 mm in height by 75 mm in width (6 in. by 3 in.).3.7.1.1 Station number symbol dimensions of 600 mm by 300 mm (24 in. by 12 in.) should be used for greater prominence with the larger muster station symbol specified in 3.7.2.1.3.7.2 Other symbol dimensions should be a minimum of 150 mm by 150 mm (6 in. by 6 in.), except:3.7.2.1 A muster station symbol with dimensions of 600 mm by 600 mm (24 in. by 24 in.) may be used in conjunction with the larger station number symbol specified in 3.7.1.1.3.8 Symbols depicted in Figs. 1 and 2 should represent the survival craft that is actually provided.1.1 This guide covers those symbols to be used to identify the location and operation of lifesaving equipment related to evacuation of personnel in the marine environment.1.2 The symbols depicted should be used whenever graphic representation could assist personnel in locating their emergency stations and equipment and in the operation of such equipment.1.3 Posters or signs depicting these symbols should be placed in conspicuous locations in the vicinity of survival craft, their launching controls, or other lifesaving equipment.1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F1297-90(2023)
标准名称:
Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment
英文名称:
Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E3104-17(2023) Standard Specification for Strippable and Removable Coatings to Mitigate Spread of Radioactive Contamination
- ASTM E3107/E3107M-23 Standard Test Method for Resistance to Penetration and Backface Deformation for Ballistic-resistant Torso Body Armor and Shoot Packs
- ASTM E3111/E3111M-22 Standard Test Methods for Ballistic Resistant Head Protection
- ASTM E3115-17(2023) Standard Guide for Capturing Facial Images for Use with Facial Recognition Systems
- ASTM E3116-23 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
- ASTM E3118/E3118M-22 Standard Test Methods to Evaluate Seismic Performance of Suspended Ceiling Systems by Full-Scale Dynamic Testing
- ASTM E3119-19 Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing
- ASTM E3120-19 Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings
- ASTM E3121/E3121M-17 Standard Test Methods for Field Testing of Anchors in Concrete or Masonry
- ASTM E3130-21 Standard Guide for Developing Cost-Effective Community Resilience Strategies
- ASTM E3131-17 Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders
- ASTM E3132/E3132M-17 Standard Practice for Evaluating Response Robot Logistics: System Configuration
- ASTM E3134-20 Standard Specification for Transportation Tunnel Structural Components and Passive Fire Protection Systems
- ASTM E3137/E3137M-18 Standard Specification for Heat Meter Instrumentation
- ASTM E314-16 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques