
【国外标准】 Household and similar electrical appliances - Safety Particular requirements for microwave ovens including combination microwave ovens (IEC 60335-2-25: Ed 5.2, IDT)
本网站 发布时间:
2021-03-22
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
AS/NZS 60335.2.25:2002/Amdt 4:2007
标准名称:
Household and similar electrical appliances - Safety Particular requirements for microwave ovens including combination microwave ovens (IEC 60335-2-25: Ed 5.2, IDT)
英文名称:
Household and similar electrical appliances - Safety Particular requirements for microwave ovens including combination microwave ovens (IEC 60335-2-25: Ed 5.2, IDT)标准状态:
现行-
发布日期:
2007-05-25 -
实施日期:
出版语种:
- 其它标准
- 上一篇: AS/NZS 60335.2.25:2002/Amdt 3:2006 Household and similar electrical appliances - Safety Particular requirements for microwave ovens including combination microwave ovens (IEC 60335-2-25 Ed 5.1, MOD)
- 下一篇: AS/NZS 60335.2.25:2011 Household and similar electrical appliances - Safety Particular requirements for microwave ovens including combination microwave ovens
- 推荐标准
- ASTM D2007-19(2024)e1 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
- ASTM E2002-22 Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
- ASTM E4-21 Standard Practices for Force Calibration and Verification of Testing Machines
- ASTM ISO/ASTM52903-2-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 2: Process equipment
- ASTM ISO/ASTM52911-2-19 Additive manufacturing — Design — Part 2: Laser-based powder bed fusion of polymers
- ASTM ISO/ASTM52926-2-23 Additive manufacturing of metals — Qualification principles — Part 2: Qualification of operators for PBF-LB
- ASTM ISO/ASTM52926-4-23 Additive manufacturing of metals — Qualification principles — Part 4: Qualification of operators for DED-LB
- ASTM ISO/ASTM52943-2-24 Additive manufacturing for aerospace — Process characteristics and performance — Part 2: Directed energy deposition using wire and arc
- ATS 4747.2-2008 Meters for non-urban water supply Specification for closed conduit meters fully charged
- ATS 5200.030-2007 Technical Specification for plumbing and drainage products Solenoid valves
- HB 101-1997 (CJC 5)/Amdt 1-1998 Coordination of power and telecommunications - Low Frequency Induction (LFI): Code of practice for the mitigation of hazardous voltages induced into telecommunications lines
- HB 102 (CJC 6)-1997/Amdt 1-1998 Coordination of power and telecommunications - Low Frequency Induction
- HB 2.2-2002 Australian Standards for civil engineering students Structural engineering
- HB 2.2-2002/Amdt 1-2002 Australian Standards for civil engineering students - Structural engineering
- HB 231:2000/Amdt 1:2001 Information security risk management guidelines