
【国外标准】 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification covers the material requirements for preformed thermoplastic vulcanizate (TPV) elastomeric joint seals for bridges. The seal consists of a multiple-web design composed of a TPV and functions only by compression of the seal between the faces of the joint with the seal folding inward at the top to facilitate compression. The seal is installed with a lubricant adhesive and is designed to seal the joint and reject incompressibles. The physical properties for which the seals shall be tested on and conform accordingly to are tensile strength, elongation at break, hardness, oven aging, ozone resistance, low- and high-temperature recovery, and compression-deflection properties.1.1 This specification covers the material requirements for preformed thermoplastic vulcanizate (TPV) elastomeric joint seals for bridges. The seal consists of a multiple-web design composed of a TPV and functions only by compression of the seal between the faces of the joint with the seal folding inward at the top to facilitate compression. The seal is installed with a lubricant adhesive and is designed to seal the joint and reject incompressibles.NOTE 1: This specification may not be applicable for seals whose height is less than 90 % of its nominal width.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D6924-03(2017)
标准名称:
Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
英文名称:
Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM D6923-23 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
- 下一篇: ASTM D6925-23 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
- 推荐标准
- ASTM F1884-04(2023) Standard Test Methods for Determining Residual Solvents in Packaging Materials
- ASTM F1885-18 Standard Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms
- ASTM F1887-14(2019)e1 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
- ASTM F1888-09(2022) Standard Test Method for Compression-Displacement of Baseballs and Softballs
- ASTM F1890-23 Standard Test Method for Measuring Softball and Baseball Bat Performance Factor
- ASTM F1892-12(2018) Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
- ASTM F1897-20 Standard Specification for Leg Protection for Chain Saw Users
- ASTM F1899-14a(2019) Standard Specification for Food Waste Pulper Without Waterpress Assembly
- ASTM F1904-23 Standard Guide for Testing the Biological Responses to Medical Device Particulate Debris and Degradation Products in vivo
- ASTM F1908-08(2018) Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
- ASTM F1909-98(2020) Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets
- ASTM F1910-98(2022) Standard Specification for Long Barbed Tape Obstacles
- ASTM F1912-21 Standard Specification for Safety of Bean Bag Chairs and Bean Bag Chair Covers
- ASTM F1913-19 Standard Specification for Vinyl Sheet Floor Covering Without Backing
- ASTM F1917-23 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories