
【国外标准】 Standard Test Method for Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 Humidity information is important for the understanding of atmospheric phenomena and industrial processes. Measurements of the dew-point and calculations of related vapor pressures are important to quantify the humidity information.1.1 This test method covers the determination of the thermodynamic dew- or frost-point temperature of ambient air by the condensation of water vapor on a cooled surface. For brevity, this is referred to in this test method as the condensation temperature.1.2 This test method is applicable for the range of condensation temperatures from 60°C to −70°C.1.3 This test method includes a general description of the instrumentation and operational procedures, including site selection, to be used for obtaining the measurements and a description of the procedures to be used for calculating the results.1.4 This test method is applicable for the continuous measurement of ambient humidity in the natural atmosphere on a stationary platform.1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 8.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D4230-20
标准名称:
Standard Test Method for Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
英文名称:
Standard Test Method for Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ANSI X9.100-20-2021 Magnetic Ink Character Recognition - Printing MICR Characters
- AS 1038.20-1992 Coal and coke - Analysis and testing Higher rank coal - Hardgrove grindability index
- AS 1038.20-2002 (R2013) Coal and coke - Analysis and testing Higher rank coal - Hardgrove grindability index
- AS 1085.20-2006 Railway track material Welding of steel rail
- AS 1141.20-1982 Methods for sampling and testing aggregates Average least dimension of aggregate by direct measurement
- AS 2001.2.20-1986 Methods of test for textiles Physical tests - Determination of seam breaking force
- ASTM D3771-15(2022) Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
- ASTM D3772-15(2021) Standard Specification for Industrial Rubber Finger Cots
- ASTM D3774-18 Standard Test Method for Width of Textile Fabric
- ASTM D3775-17(2023) Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
- ASTM D378-10(2016) Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
- ASTM D3780-22 Standard Performance Specification for Men's and Boys' Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics
- ASTM D3785-20 Standard Performance Specification for Woven Necktie and Scarf Fabrics
- ASTM D3786/D3786M-18(2023) Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
- ASTM D3787-16(2020) Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test