- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- ITU >>
- ITU-T L.17 Appendix I Examples of possible applications
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
ITU-T L.17 Appendix I
标准名称:
Examples of possible applications
英文名称:
标准状态:
现行-
发布日期:
2007-02-01 -
实施日期:
出版语种:
- 其它标准
- 上一篇: ITU-T J.244 Full reference and reduced reference calibration methods for video transmission systems with constant misalignment of spatial and temporal domains with constant gain and offset
- 下一篇: ITU-T Q.1912.5B Interworking between session initiation protocol (SIP) and bearer independent call control protocol (BICC) or ISDN user part (ISUP): Protocol implementation conformance statement (PICS)
- 推荐标准
- AS 1038.17-2000 (R2013) Coal and coke - Analysis and testing Higher rank coal - Moisture-holding capacity (equilibrium moisture)
- AS 1085.17-2000 Railway permanent way material Steel sleepers
- AS 1735.17-1995 Lifts, escalators and moving walks Lifts for people with limited mobility - Restricted use - Water-drive
- AS 2362.17-1990 Automatic fire detection and alarm systems - Methods of test for actuating devices Sensitivity test
- AS 2362.17-1993 Automatic fire detection and alarm systems - Methods of test for actuating devices Sensitivity test
- ASTM D5017-17 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
- ASTM D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
- ASTM D5057-17 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
- ASTM D5116-17 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
- ASTM D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
- ASTM D5217-17 Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM D522/D522M-17(2021) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
- ASTM D5346-17(2021) Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
- ASTM D5422-17 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
- ASTM D5470-17 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials