【国外标准】 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

本网站发布时间： 2024-02-28

ASTM B963-22
Active
定价：590元
加购物车
在线阅读

开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！查看详情>>

标准简介

适用范围：

5.1 Oil content values are generally contained in specifications for oil-impregnated PM bearings.5.2 The oil-impregnation efficiency provides an indication of how well the as-received parts had been impregnated.5.3 The desired self-lubricating performance of PM bearings requires a minimum amount of surface-connected porosity and satisfactory oil impregnation of the surface-connected porosity. A minimum oil content is specified.5.4 The results from these test methods may be used for quality control or compliance purposes.1.1 This standard describes three related test methods that cover the measurement of physical properties of oil-impregnated powder metallurgy products.1.1.1 Determination of the volume percent of oil contained in the material.1.1.2 Determination of the efficiency of the oil-impregnation process.1.1.3 Determination of the percent surface-connected porosity by oil impregnation.1.2 Units—With the exception of the values for density and the mass used to determine density, for which the use of the gram per cubic centimetre (g/cm3) and gram (g) units is the long-standing industry practice, the values in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

基本信息

标准号：
ASTM B963-22
标准名称：
Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
英文名称：
Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
标准状态：
Active
发布日期：
实施日期：
出版语种：

标准分类号

标准ICS号：
77.160
中标分类号：

关联标准

替代以下标准：
被以下标准替代：
引用标准：
采用标准：

出版信息

页数：
6 页
字数：
开本：

其他信息

起草人：
起草单位：
归口单位：
B09.04
提出部门：
发布部门：

其它标准

推荐标准