【国外标准】 Sterilization of health care products -- Radiation -- Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
本网站 发布时间:
2024-10-15
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
暂无
标准号:
JIS T 0806-1:2010
标准名称:
Sterilization of health care products -- Radiation -- Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
英文名称:
Sterilization of health care products -- Radiation -- Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices标准状态:
被代替-
发布日期:
2010-02-25 -
实施日期:
出版语种:
- 其它标准
- 上一篇: JIS T 0801:2016 Sterilization of health care products -- Ethylene oxide -- Requirements for the development, validation and routine control of a sterilization process for medical devices
- 下一篇: JIS T 0806-1:2015 Sterilization of health care products -- Radiation -- Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
- 推荐标准
- ASTM C1702-23e1 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM D2555-17a(2024)e1 Standard Practice for Establishing Clear Wood Strength Values
- ASTM D4439-24e1 Standard Terminology for Geosynthetics
- ASTM D6724/D6724M-16(2024)e1 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
- ASTM F2623-24e1 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- ASTM D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM D6416/D6416M-16e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
- ASTM D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- ASTM D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
- ASTM D6795-19ae1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
- ASTM D6796-21e1 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
我的标准
购物车
400-168-0010










