
【国外标准】 IEEE Standard for Indoor AC Switches (1 kV to 38 kV) for Use in Metal-Enclosed Switchgear
本网站 发布时间:
2025-04-28
- IEEE C37.20.4-2013
- 定价: 81元 / 折扣价: 69 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard covers indoor ac switches rated above 1 kV through 38 kV for use in metal-enclosed switchgear as follows: a) Stationary or drawout b) Manual or power operation c) Fused or unfused The term ''indoor'' is intended to indicate that the enclosure provides a degree of protection to the switch and the enclosure may be suitable for indoor, outdoor, or other service conditions and complies with the requirements of switchgear assemblies as defined by IEEE Std C37.20.2TM or IEEE Std C37.20.3… read more TM.1 This standard does not apply to switches for use in subsurface or pad-mounted switchgear in IEEE Std C37.74TM or to high-voltage air switches in IEEE Std C37.30TM. Within this standard, the words "switch(es)" shall be considered to mean metal-enclosed, indoor, three-phase, ac medium-voltage switch(es) as defined by this scope. There are switch designs that have short-circuit current interrupting capability, and these devices are covered by this standard only to the extent of meeting the listed testing requirements. However, due to the additional capability, additional testing is required and the manufacturers should be consulted. read less
标准号:
IEEE C37.20.4-2013
标准名称:
IEEE Standard for Indoor AC Switches (1 kV to 38 kV) for Use in Metal-Enclosed Switchgear
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM C1130-24 Standard Practice for Calibration of Thin Heat Flux Transducers
- ASTM C1154-24 Standard Terminology for Fiber-Reinforced Cement Products
- ASTM C1227-24 Standard Specification for Precast Concrete Septic Tanks
- ASTM C1242-23c Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
- ASTM C1256-25 Standard Practice for Interpreting Glass Fracture Surface Features
- ASTM C1363-24 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
- ASTM C1558-24 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
- ASTM C1613-24 Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
- ASTM C1668-24 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
- ASTM C1702-23e1 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1710-24 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
- ASTM C1774-24 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
- ASTM C1937-24 Standard Specification for Layered, Glass Fiber Felt Pipe and Board Insulation
- ASTM C31/C31M-24a Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM C390-08(2024) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots