
【国外标准】 Occupational health and safety management systems. General guidelines for the application of ISO 45001
本网站 发布时间:
2024-11-27
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
BS 45002-3:2018
标准名称:
Occupational health and safety management systems. General guidelines for the application of ISO 45001
英文名称:
Occupational health and safety management systems. General guidelines for the application of ISO 45001标准状态:
现行-
发布日期:
2018-07-27 -
实施日期:
出版语种:
- 其它标准
- 上一篇: BS 45002-2:2019 Occupational health and safety management systems. General guidelines for the application of ISO 45001
- 下一篇: BS 4500:2009 Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
- 推荐标准
- ASTM E1938-13(2018) Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
- ASTM E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers
- ASTM E196-06(2018) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
- ASTM E1998-11(2018) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
- ASTM E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- ASTM E2139-05(2018) Standard Test Method for Same-Different Test
- ASTM E2203-14(2018) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
- ASTM E2208-02(2018)e1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
- ASTM E2213-03(2018) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5-GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications
- ASTM E2259-03a(2018) Standard Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data
- ASTM E2444-11(2018) Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films
- ASTM E2467-05(2018) Standard Practice for Developing Axle Count Adjustment Factors
- ASTM E2468-05(2018) Standard Practice for Metadata to Support Archived Data Management Systems
- ASTM E2472-12(2018)e2 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E2472-12(2018)e3 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions