
【国外标准】 IEEE Guide on the Prediction,Measurement, and Analysis of AM Broadcast Reradiation by Power Lines
本网站 发布时间:
2025-04-28
- IEEE 1260-2018
- 定价: 66元 / 折扣价: 57 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This guide provides a set of procedures that can be used to cope with reradiation of AM broadcast signals from power lines. It can also be applied to other large metallic structures. While the procedures listed in this guide may be applicable to reradiation problems from other medium frequency (MF) sources, such as navigation beacons, they are not intended to be applied to reradiation problems from higher frequency sources, such as television broadcast signals. This guide is not designed to be applied as legal evidence of harmful effects of a reradiating structure upon an AM broadcasting station. In some jurisdictions, the government regulatory or licensing authority has defined specific procedures for the determination of radiation patterns of medium wave antenna systems. Some of these procedures are also contained in international treaties and agreements, and as such are binding on the licensees of the signatory jurisdictions. When there is agreement between the party or parties who are licensed to operate the medium wave antenna system(s) in question and the parties proposing construction of potential reradiating structures, the procedures of the responsible government agency or authority shall have precedence over the method outlined in this guide.
标准号:
IEEE 1260-2018
标准名称:
IEEE Guide on the Prediction,Measurement, and Analysis of AM Broadcast Reradiation by Power Lines
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ANSI X9.100-140-2018 Financial Services - Image Replacement Document - IRD
- ANSI X9.100-180-2006 (S2018) Specifications for Electronic Exchange of Check and Image Data (non-domestic) (Formerly published as DSTU X9.37-2003)
- ANSI X9.100-188-2018 Financial Services - Return Reasons for Check - Image Exchange and IRDs
- ANSI X9.112-3-2018 Wireless Management and Security - Part 3: Mobile
- ANSI X9.84-2018 Biometric Information Management and Security for the Financial Services Industry
- ANSI/OPEI B175.6-2018 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Hedge Trimmers - Safety and Environmental Requirements
- AS 1366.1-1992 (R2018)/Amdt 1-1992 Rigid cellular plastics sheets for thermal insulation - Rigid cellular polyurethane (RC/PUR)
- AS 1366.3-1992 (R2018)/Amdt 1-1993 Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - Moulded (RC/PS - M)
- ASTM E1938-13(2018) Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
- ASTM E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers
- ASTM E196-06(2018) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
- ASTM E1998-11(2018) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
- ASTM E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- ASTM E2139-05(2018) Standard Test Method for Same-Different Test
- ASTM E2203-14(2018) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories