
【国外标准】 Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 Water treatment membrane devices can be used to produce potable water from brackish supplies and seawater as well as to upgrade the quality of industrial water. This standard permits the evaluation of the integrity and performance of membrane elements using visual observations and standard sets of conditions and are for short-term testing (<24 h). This standard can be used to determine changes that may have occurred in the operating characteristics of elements but are not intended to be used for plant design.1.1 This practice covers the inspection, performance testing, autopsy, and analytical work associated with evaluating pressure driven membrane separation elements (microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO)).1.2 This practice is applicable for elements when newly manufactured or at any time during their operation in a water treatment facility. The Analytical section (6.4) covers only membrane surface and foulant analyses.1.3 The data derived from these tests should be evaluated versus newly manufactured elements/bundles or against operating systems when they were initially brought on-stream, or both. Industry norms can also be used for comparative purposes.1.4 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D7601-19
标准名称:
Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
英文名称:
Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6014-00(2023) Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
- ASTM D6016-17(2023) Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
- ASTM D6017-97(2020)e1 Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather
- ASTM D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
- ASTM D6022-19 Standard Practice for Calculation of Permanent Shear Stability Index
- ASTM D6023-16 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
- ASTM D6024/D6024M-16 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
- ASTM D6027/D6027M-24 Standard Practice for Calibration/Verification of Linear Displacement Transducers for Geotechnical Purposes
- ASTM D6028/D6028M-20 Standard Practice for (Analytical Procedure) Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
- ASTM D6029/D6029M-20 Standard Practice for (Analytical Procedures) Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
- ASTM D6031/D6031M-24 Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
- ASTM D6032/D6032M-17 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
- ASTM D6033-16 Standard Guide for Describing the Functionality of a Groundwater Modeling Code
- ASTM D6039/D6039M-18 Standard Specification for Open and Covered Wood Crates
- ASTM D6040-18(2023) Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape