【国外标准】 Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
4.1 This practice will provide the following: (1) a statistical summary of individual production run data plotted on a control chart; (2) a statistical summary of data from multiple production runs; (3) a procedure to relate the average and variation of these data groups to specification limits, and (4) indexes for comparing different manufacturing units for projecting future capabilities or as historical reference.1.1 This practice covers (1) a statistical procedure for analyzing the test data generated in the statistical process control of a carbon black manufacturing process; (2) a format for reporting process capability determined from the analysis of control chart data of an individual production run, and (3) a format for reporting process performance determined from the analysis of control chart data of an individual production run.1.2 This practice specifically applies to the analysis of pelleted carbon black samples taken during the manufacturing process prior to storage. This practice does not apply to shipment samples taken from hopper cars or other containers or packages.1.3 This practice is specifically designed to be used for those test methods given in Classification D1765 which specify target values. However, these techniques are applicable to other test methods on carbon black.1.4 This practice describes the calculation for two methods of determining capability factors from an analysis of process control data.1.4.1 Process capability (Cp) is a measurement of variation calculated from the process control chart data with the use of an estimated standard deviation (^σ) from the mean value of the moving range (R) chart. The calculation of the process capability (Cp and Cpk) indexes can be used as historical information or to predict future performance of the process, but are only valid when the process is in a state of statistical control.1.4.2 Process performance (Pp) is a measurement of variation calculated from the process control chart data using sample standard deviation(s). The calculation of the process performance (Pp and Ppk) indexes are used for a historical reference of a process' performance and does not require a state of statistical control.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D4583-21
标准名称:
Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data
英文名称:
Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- BS EN IEC 61753-081-02:2023 Fibre optic interconnecting devices and passive components. Performance standard