
【国外标准】 Information Processing - Data Interchange On 130 Mm (5.25 In) Flexible Disk Cartridges Using Modified Frequency Modulation Recording At 7 958 Ftprad, 3,8 Tpmm (96 Tpi), On Both Sides - Part 3: Track Format B
本网站 发布时间:
2025-07-17
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Specifies the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5.25 in) flexible disk cartridges intended for data interchange between data processing systems.
标准号:
INCITS/ISO 8378-3-1986 (R2018)
标准名称:
Information Processing - Data Interchange On 130 Mm (5.25 In) Flexible Disk Cartridges Using Modified Frequency Modulation Recording At 7 958 Ftprad, 3,8 Tpmm (96 Tpi), On Both Sides - Part 3: Track Format B
英文名称:
Information Processing - Data Interchange On 130 Mm (5.25 In) Flexible Disk Cartridges Using Modified Frequency Modulation Recording At 7 958 Ftprad, 3,8 Tpmm (96 Tpi), On Both Sides - Part 3: Track Format B标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO 8372-1987 Information Processing - Modes of Operation for a 64-Bit Block Cipher Algorithm (formerly ANSI/ISO 8372-1987)
- 下一篇: INCITS/ISO 8378-3-1986 (S2008) Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on Both Sides - Part 3: Track Format B (formerly ANSI/ISO 8378-3-1986)
- 推荐标准
- ASTM E1938-13(2018) Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
- ASTM E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers
- ASTM E196-06(2018) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
- ASTM E1998-11(2018) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
- ASTM E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- ASTM E2139-05(2018) Standard Test Method for Same-Different Test
- ASTM E2203-14(2018) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
- ASTM E2208-02(2018)e1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
- ASTM E2213-03(2018) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5-GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications
- ASTM E2259-03a(2018) Standard Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data
- ASTM E2444-11(2018) Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films
- ASTM E2467-05(2018) Standard Practice for Developing Axle Count Adjustment Factors
- ASTM E2468-05(2018) Standard Practice for Metadata to Support Archived Data Management Systems
- ASTM E2472-12(2018)e2 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E2472-12(2018)e3 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions