
【国外标准】 Standard Test Method for Odor of Volatile Solvents and Diluents
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
3.1 The comparative odor characteristics can be used, combined with other tests, for product identification and assessing compliance with a specification.3.2 The residual odor characteristics can be used to judge the presence of relatively nonvolatile materials that may be associated with manufacture or contamination during distribution. Since volatile solvents and diluents are used in a wide variety of chemical processes and residual materials may affect the efficiency of such processes, this test method provides a comparative test for manufacturing control and assessing compliance with a specification.1.1 This test method covers a comparative procedure for observing the characteristic and residual odors of volatile organic solvents and diluents to determine their odor acceptability in a solvent system.1.2 It is not intended that this test method be employed to determine subtle odor differences between materials or to determine odor intensity.1.3 It is recommended that this test method not be employed to determine the residual odor of a liquid if its time for evaporation to dryness at room temperature exceeds 30 min or as agreed upon.1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 4.1.6 For specific hazard information, see the supplier's Material Safety Data Sheet (MSDS).1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D1296-23
标准名称:
Standard Test Method for Odor of Volatile Solvents and Diluents
英文名称:
Standard Test Method for Odor of Volatile Solvents and Diluents标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 推荐标准
- AS 1038.23-2002 (R2013) Coal and coke - Analysis and testing Higher rank coal and coke - Carbonate carbon
- AS 1774.23.1-1992 Refractories and refractory materials - Physical test methods Abradability index - Oblique method
- AS 1807.23-1989 Cleanrooms, workstations and safety cabinets - Methods of test Determination of intensity of radiation from germicidal ultraviolet lamps
- ASTM D3771-15(2022) Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
- ASTM D3772-15(2021) Standard Specification for Industrial Rubber Finger Cots
- ASTM D3774-18 Standard Test Method for Width of Textile Fabric
- ASTM D3775-17(2023) Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
- ASTM D378-10(2016) Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
- ASTM D3780-22 Standard Performance Specification for Men's and Boys' Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics
- ASTM D3785-20 Standard Performance Specification for Woven Necktie and Scarf Fabrics
- ASTM D3786/D3786M-18(2023) Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
- ASTM D3787-16(2020) Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test
- ASTM D3791/D3791M-11(2018) Standard Practice for Evaluating the Effects of Heat on Asphalts
- ASTM D3802-23 Standard Test Method for Ball-Pan Hardness of Activated Carbon
- ASTM D3805/D3805M-16(2023) Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings