【国外标准】 IEEE/IEC International Standard for High-voltage switchgear and controlgear--Part 37-013: Alternating current generator circuit-breakers
本网站 发布时间:
2025-10-27
- IEEE/IEC 62271-37-013-2021
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This part of IEC 62271 is applicable to three-phase AC high-voltage generator circuit-breakers, hereafter called generator circuit-breakers, designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 kV and up to 38 kV. It is applicable to generator circuit-breakers that are installed between the generator and the transformer terminals. Requirements relative to generator circuit-breakers intended for use with generators and… read more transformers rated 10 MVA or more are covered specifically. Generator circuits rated less than 10 MVA and pumped-storage installations are considered special applications, and their requirements are not completely covered by this document. This document is also applicable to the operating mechanisms of generator circuit-breakers and to their auxiliary equipment. read less
标准号:
IEEE/IEC 62271-37-013-2021
标准名称:
IEEE/IEC International Standard for High-voltage switchgear and controlgear--Part 37-013: Alternating current generator circuit-breakers
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2021-1994 Acoustics - Aircraft noise intrusion - Building siting and construction
- AS 2021-1994/Amdt 1-1995 Acoustics - Aircraft noise intrusion - Building siting and construction
- ASTM A447/A447M-11(2021) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
- ASTM A482/A482M-11(2021) Standard Specification for Ferrochrome-Silicon
- ASTM A507-16(2021) Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
- ASTM A540/A540M-15(2021) Standard Specification for Alloy-Steel Bolting for Special Applications
- ASTM A543/A543M-09(2021) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
- ASTM A720/A720M-02(2021) Standard Test Method for Ductility of Nonoriented Electrical Steel
- ASTM A763-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
- ASTM A786/A786M-15(2021) Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
- ASTM A803/A803M-16(2021) Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
- ASTM A849-15(2021) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- ASTM A899-91(2021) Standard Specification for Steel Wire, Epoxy-Coated
- ASTM A986/A986M-01(2021) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
- ASTM B107/B107M-13(2021) Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

我的标准
购物车
400-168-0010








