
【国外标准】 American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents, American National Standard
本网站 发布时间:
2025-04-28
- IEEE/ANSI N42.18-1980
- 定价: 103元 / 折扣价: 88 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard provides recommendations for the selection of instrumentation specific to the continuous monitoring and quantification of radioactivity in effluents released to the environment. The effluent streams considered may contain radioactive gases, liquids, particulates, or dissolved solids singly or in combination. This standard specifies detection capabilities, physical and operating limits, reliability, and calibration requirements and sets forth minimum performance requirements for… read more effluent monitoring instrumentation. Unless otherwise specified, the criteria herein refer to the total system. This standard applies only to monitoring during routine operation that includes abnormal releases. Emergency situations, where additional performance capability will be required, are a matter of separate consideration. Also outside the scope of this standard are sample extraction and laboratory analyses, normally used for inter comparison between monitor calibrations and laboratory analyses, and other applications for continuous monitoring instrumentation such as environmental monitoring or process control. Sampling techniques are covered in ANSI N13.1-1969, Guide to Sampling Airborne Radioactive Materials in Nuclear Facilities read less
标准号:
IEEE/ANSI N42.18-1980
标准名称:
American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents, American National Standard
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6511/D6511M-18(2024) Standard Test Methods for Solvent Bearing Bituminous Compounds
- ASTM D6638-18(2024) Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
- ASTM D6916-18(2024) Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
- ASTM D8105-18(2024) Standard Guide for Use and Application of Geosynthetic Reinforcement Reduction Factor Test Results
- ASTM D3370-18 Standard Practices for Sampling Water from Flowing Process Streams
- ASTM D3385-18 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
- ASTM D3456-18 Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
- ASTM D3676-18 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
- ASTM D3703-18 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
- ASTM D3712-18 Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography
- ASTM D3744/D3744M-18 Standard Test Method for Aggregate Durability Index
- ASTM D3774-18 Standard Test Method for Width of Textile Fabric
- ASTM D3786/D3786M-18(2023) Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
- ASTM D3866-18 Standard Test Methods for Silver in Water
- ASTM D3951-18(2023) Standard Practice for Commercial Packaging