【国外标准】 Standard Specification for Non-Essential Ice Detectors for Aircraft
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
This specification establishes the requirements for non-essential ice detection system aspects of airworthiness and design for aeroplanes. The term ”aeroplane” as used in this specification was originally conceived for normal category fixed wing aircraft with a certified maximum takeoff weight (MTOW) of 19,000 lb or less and a passenger seating configuration up to 19 as defined in the Rules. However, these standards may be more broadly applicable, and their usage should not be unnecessarily limited. The installation of a non-essential ice detector is limited to level 1, 2, 3 and 4 Aeroplanes and normal, utility, acrobatic, or commuter category Aeroplanes. This specification prohibits the installation of a non-essential ice detector as a replacement for or modification to an existing Primary or Advisory ice detection system.This specification covers the general requirements (product identification, operating conditions, installation manual, user's manual); functional requirements (intended function, performance, accessibility of controls, software); environmental requirements (operating temperature range, storage/survival temperature range, operating humidity range, operating altitude range, operating airspeed range, vibration, icing, deicing fluids, emissions of radiofrequency energy, electrical power input). Also covered by this specification are installation requirements, crew interface, system safety analysis, and operating limitations.1.1 This specification covers international standards for non-essential ice detection system aspects of airworthiness and design for aeroplanes.1.2 The term “aeroplane” is utilized in this specification as it was originally conceived for normal category fixed wing aircraft with a certified maximum takeoff weight (MTOW) of 19 000 lb or less and a passenger seating configuration up to 19 as defined in the Rules. However, these standards may be more broadly applicable and their usage should not be unnecessarily limited.1.3 The applicant for a design approval must seek the individual guidance of their respective CAA body concerning the use of this specification as part of a certification plan. For information on which CAA regulatory bodies have accepted this specification (in whole or in part) as a means of compliance to their Small Aircraft Airworthiness regulations (hereinafter referred to as “the Rules”), refer to ASTM F44 webpage (www.ASTM.org/COMMITTEE/F44.htm) which includes CAA website links. It is the responsibility of the Applicant to validate any applicability beyond that identified in this specification and request acceptance from the applicable CAA.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F3310-18
标准名称:
Standard Specification for Non-Essential Ice Detectors for Aircraft
英文名称:
Standard Specification for Non-Essential Ice Detectors for Aircraft标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- 24/30485461 DC standard