
【国外标准】 Standard Practice for Physical Characterization of Paint Brushes
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
3.1 It is important to recognize that a brush can be a mixture of several chemically different filaments or bristles, or both, in several cross sections, thicknesses and lengths. The following procedures will be helpful in identifying brush composition.1.1 This practice covers the dimensions, terminology, materials and characteristics generally considered of importance to those within, or dealing with paint brushes, and describes methods of determining these parameters. This practice is not meant to be a definitive analytical method to deformulate brushes.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM D5301-92(2016)
标准名称:
Standard Practice for Physical Characterization of Paint Brushes
英文名称:
Standard Practice for Physical Characterization of Paint Brushes标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 4267-1995 (R2016)/Amdt 1-1995 Pressure regulators for use with industrial compressed gas cylinders
- AS 4428.5-1998 (R2016)/Amdt 1-2002 Fire detection, warning, control and intercom systems - Control and indicating equipment Power supply units
- AS 4429-1999 (R2016)/Amdt 1-2002 Methods of test and rating requirements for smoke-spill fans
- AS 4458-1997 (R2016)/Amdt No. 1-1999 Pressure equipment - Manufacture
- AS 5040-2003 (R2016)/Amdt 1-2007 Installation of security screen doors and window grilles
- AS 5041-2003 (R2016)/Amdt 1-2007 Methods of test - Security screen doors and window grilles
- AS 5068-2006 (R2016)/Amdt 1-2010 Timber - Finger joints in structural products - Production requirements
- AS 60044.1-2007 (R2016)/Amdt 1-2012 Instrument transformers Current transformers
- AS A81, A82, A83, A84, A92-1958 Steel reinforcing materials for normal reinforced concrete
- AS ISO/IEC 17025-2005 (R2016)/Amdt 1-2006 General requirements for the competence of testing and calibration laboratories
- AS/NZS 1170.1:2002 (R2016)/Amdt 1:2005 Structural design actions Permanent, imposed and other actions
- AS/NZS 1170.1:2002 (R2016)/Amdt 2:2009 Structural design actions Permanent, imposed and other actions
- AS/NZS 1595:1998 (R2016)/Amdt 1:2014 Cold-rolled, unalloyed, steel sheet and strip
- AS/NZS 2111.19.2:1996 (R2016)/Amdt 1:1998 Textile floor coverings - Tests and measurements - Colourfastness tests - Shampoo solution
- AS/NZS 2270:2006 (R2016)/Amdt 1:2007 Plywood and blockboard for interior use